Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 44444 DEA: ASCP EFIS: ASCP
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for Asphalt Supplier Certification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2024-07-23-92
TL Number from the TL Form:
Sample Submitted By Organization: Western Emulsions, Incorporated - Coolidge
Sample Organization Contact: (208) 715-1675
Type of Sample: Quality Control
Type of Material: Asphalt Binder
Sample Taken Date: 07/23/2024
Date that the sample was received by the laboratory/organization performing the testing: 07/23/2024
The quantity of what the sample constitutes: 1 of 2, split sample
A brief description of the sample: Tank 5K1
From where was the sample collected: Manufacturer
Laboratory sample identification: 240723-7622M-02
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Coolidge, AZ
Performance Grade: PG 76-22 M
Modified: Yes
Lot number:
Sublot number:
Tank number: 5K1
Time of sample:
HMA Supplier:
Certified Asphalt Supplier: Western Emulsions Incorporated - Coolidge AZ
Multigrade: No
Multigrade Type:
Asphalt Binder Mix Number:
DIME Test ID: 2024-07-23-92-1
Test Method: AASHTO T316-17: Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
Verified Date: 08/05/2024
Date Tested: 08/05/2024
Submitted By Organization: Western Emulsions, Incorporated - Coolidge
Organization Address: 3450 East 36th Street,
Organization City: Tucson
Organization State: AZ
Organization Zipcode: 85713
Organization Email: ltorres@westernemulsions.com
Organization Phone: (208) 715-1675
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Is viscosity reading in cP/Pa-s?
|
Pa-s
|
|
Time of test
|
no data
|
|
Test Temperature
|
no data
|
|
Speed
|
no data
|
|
Spindle size
|
no data
|
|
Torque
|
no data
|
|
Viscosity reading #1 (A)
|
no data
|
|
Viscosity reading #2 (B)
|
no data
|
|
Viscosity reading #3 (C)
|
no data
|
|
Average viscosity
|
1.585 Pa-s
|
DIME Test ID: 2024-07-23-92-2
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 08/05/2024
Date Tested: 08/05/2024
Submitted By Organization: Western Emulsions, Incorporated - Coolidge
Organization Address: 3450 East 36th Street,
Organization City: Tucson
Organization State: AZ
Organization Zipcode: 85713
Organization Email: ltorres@westernemulsions.com
Organization Phone: (208) 715-1675
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Phase
|
Original binder
|
|
Phase Angle (δ) (for the 10 cycles)
|
no data
|
|
Dynamic Shear, G*/sin(δ)
|
1.44 kPa
|
DIME Test ID: 2024-07-23-92-3
Test Method: AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
Verified Date: 08/05/2024
Date Tested: 08/05/2024
Submitted By Organization: Western Emulsions, Incorporated - Coolidge
Organization Address: 3450 East 36th Street,
Organization City: Tucson
Organization State: AZ
Organization Zipcode: 85713
Organization Email: ltorres@westernemulsions.com
Organization Phone: (208) 715-1675
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Is mass change based on one or two containers?
|
One
|
|
Average mass change
|
-0.324 percent
|
DIME Test ID: 2024-07-23-92-4
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 08/05/2024
Date Tested: 08/05/2024
Submitted By Organization: Western Emulsions, Incorporated - Coolidge
Organization Address: 3450 East 36th Street,
Organization City: Tucson
Organization State: AZ
Organization Zipcode: 85713
Organization Email: ltorres@westernemulsions.com
Organization Phone: (208) 715-1675
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Phase
|
RTFO residue
|
|
Phase Angle (δ) (for the 10 cycles)
|
no data
|
|
Dynamic Shear, G*/sin(δ)
|
3.05 kPa
|
DIME Test ID: 2024-07-23-92-5
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 08/05/2024
Date Tested: 08/05/2024
Submitted By Organization: Western Emulsions, Incorporated - Coolidge
Organization Address: 3450 East 36th Street,
Organization City: Tucson
Organization State: AZ
Organization Zipcode: 85713
Organization Email: ltorres@westernemulsions.com
Organization Phone: (208) 715-1675
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Phase
|
RTFO residue two specimens
|
|
Test Plate Diameter
|
no data
|
|
Phase Angle (δ) (for the 10 cycles)
|
no data
|
|
Dynamic Shear, G*/sin(δ)
|
no data
|
|
Phase Angle 2 (δ) (for the 10 cycles)
|
no data
|
|
Dynamic Shear 2, G*/sin(δ)
|
no data
|
|
Delta at 2.2 kpa
|
67.1 degree
|
DIME Test ID: 2024-07-23-92-6
Test Method: AASHTO T301-22: Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer
Verified Date: 08/05/2024
Date Tested: 08/05/2024
Submitted By Organization: Western Emulsions, Incorporated - Coolidge
Organization Address: 3450 East 36th Street,
Organization City: Tucson
Organization State: AZ
Organization Zipcode: 85713
Organization Email: ltorres@westernemulsions.com
Organization Phone: (208) 715-1675
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
% Elongation Recovery
|
78 %
|
DIME Test ID: 2024-07-23-92-7
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 08/05/2024
Date Tested: 08/05/2024
Submitted By Organization: Western Emulsions, Incorporated - Coolidge
Organization Address: 3450 East 36th Street,
Organization City: Tucson
Organization State: AZ
Organization Zipcode: 85713
Organization Email: ltorres@westernemulsions.com
Organization Phone: (208) 715-1675
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Phase
|
PAV residue
|
|
Test Plate Diameter
|
no data
|
|
Phase Angle (δ) (for the 10 cycles)
|
no data
|
|
(G*) x sin(δ)=
|
2157 kPa
|
DIME Test ID: 2024-07-23-92-8
Test Method: AASHTO T313-22: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Verified Date: 08/05/2024
Date Tested: 08/05/2024
Submitted By Organization: Western Emulsions, Incorporated - Coolidge
Organization Address: 3450 East 36th Street,
Organization City: Tucson
Organization State: AZ
Organization Zipcode: 85713
Organization Email: ltorres@westernemulsions.com
Organization Phone: (208) 715-1675
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Time test started
|
no data
|
|
Flags issued by software during test
|
no data
|
|
Correlation coefficient (R²)
|
no data0
|
|
Regression coefficient a
|
no data
|
|
Regression coefficient b
|
no data
|
|
Regression coefficient c
|
no data
|
|
Load at time 0.0
|
no data0 mN
|
|
Deflection at time 0.0 s
|
no data0 µm
|
|
Load at time 0.5 s
|
no data0 mN
|
|
Deflection at time 0.5 s
|
no data0 µm
|
|
Load at 60.0 s
|
no data0 mN
|
|
Beam deflection 60.0 s
|
no data0 µm
|
|
Measured Stiffness Modulus 60.0 s
|
no data
|
|
Estimated Stiffness Modulus 60.0 s
|
147 mPa
|
|
Difference between stiffness moduli 60.0 s
|
no data
|
|
Estimated m-value 60.0 s
|
no data
|
DIME Test ID: 2024-07-23-92-9
Test Method: AASHTO T313-22: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Verified Date: 08/05/2024
Date Tested: 08/05/2024
Submitted By Organization: Western Emulsions, Incorporated - Coolidge
Organization Address: 3450 East 36th Street,
Organization City: Tucson
Organization State: AZ
Organization Zipcode: 85713
Organization Email: ltorres@westernemulsions.com
Organization Phone: (208) 715-1675
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
|
Time test started
|
no data
|
|
Flags issued by software during test
|
no data
|
|
Correlation coefficient (R²)
|
no data0
|
|
Regression coefficient a
|
no data
|
|
Regression coefficient b
|
no data
|
|
Regression coefficient c
|
no data
|
|
Load at time 0.0
|
no data0 mN
|
|
Deflection at time 0.0 s
|
no data0 µm
|
|
Load at time 0.5 s
|
no data0 mN
|
|
Deflection at time 0.5 s
|
no data0 µm
|
|
Load at 60.0 s
|
no data0 mN
|
|
Beam deflection 60.0 s
|
no data0 µm
|
|
Measured Stiffness Modulus 60.0 s
|
no data
|
|
Estimated Stiffness Modulus 60.0 s
|
no data
|
|
Difference between stiffness moduli 60.0 s
|
no data
|
|
Estimated m-value 60.0 s
|
0.319
|
