Print Report | Back to Sample Detail

Sample Record for 2024-07-24-31

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 995244 DEA: 061A4604 EFIS: 0620000037 QA Service Level: 1
DIST-CO-RTE-PM: 06-FRE-180-89.6/90.7
Work Description: HMA (TYPE A), HMA-OGFC, CL2 AGGREGATE BASE AND ROADWAY EXCAVATION.
Location Description: FRESNO COUNTY AT YOKUTS VALLEY FROM 0.2 MILE EAST OF GEORGE SMITH ROAD TO ELWOOD ROAD.
Contractor Name: CAL VALLEY CONSTRUCTION, INC.
Contractor Address: 5125 North Gate Avenue Suite 102, Fresno, CA 93722
Resident Engineer: Gashu Enquanhone Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-07-24-31
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Millbrook Field Laboratory
Sample Organization Contact: (559) 341-3953
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 07/24/2024
Date that the sample was received by the laboratory/organization performing the testing: 07/24/2024
The quantity of what the sample constitutes: 0-750 Tons Produced
A brief description of the sample: 3/4 HMA Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Sanger

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-20-0016
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Automatic Sampling Device @ Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number: 1
Sublot number: 1
Aggregate Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2024-07-24-31-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 07/26/2024
Date Tested: 07/24/2024
Submitted By Organization: CT D06 - Millbrook Field Laboratory
Organization Address: 1352 W. Olive Ave,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93728
Organization Email: tomas.silva@dot.ca.gov
Organization Phone: (559) 417-5341
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 2 in. sieve no data
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 98 %
Cumulative percent passing the 1/2 in. sieve 89 %
Cumulative percent passing the 3/8 in. sieve 76 %
Cumulative percent passing the #4 sieve 48 %
Cumulative percent passing the #8 sieve 35 %
Cumulative percent passing the #16 sieve 28 %
Cumulative percent passing the #30 sieve 18 %
Cumulative percent passing the #50 sieve 10 %
Cumulative percent passing the #100 sieve 6 %
Cumulative percent passing the #200 sieve 3.5 %

Test 2 of 2

DIME Test ID: 2024-07-24-31-2
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 07/26/2024
Date Tested: 07/24/2024
Submitted By Organization: CT D06 - Millbrook Field Laboratory
Organization Address: 1352 W. Olive Ave,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93728
Organization Email: tomas.silva@dot.ca.gov
Organization Phone: (559) 417-5341
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sand Equivalent 78