Print Report | Back to Sample Detail

Sample Record for 2024-07-17-62

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 995535 DEA: 120T8704 EFIS: 1222000109 QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-5,57-30.3/39.6,10.7/21.8
Work Description: APPLY METHACRYLATE, POLYESTER CONCRETE, AND REPLACE JOINT SEALS.
Location Description: ORANGE COUNTY AT VARIOUS LOCATIONS ON ROUTE 5 FROM ROUTE 5/55 SEPARATION TO EUCLID STREET OVERCROSSING AND ON ROUTE 57 FROM ROUTE 5/57 SEPARATION TO TONNER CANYON ROAD UNDERCROSSING
Contractor Name: TRUESDELL CORPORATION OF CALIFORNIA, INC.
Contractor Address: 1310 W. 23rd Street, Temple, AZ 85282
Resident Engineer: Karim Ahmed Structure Rep.: Bijan Ronagh-Langroodi

Sample Information

DIME Sample ID: 2024-07-17-62
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Methacrylate
Sample Taken Date: 07/17/2024
Date that the sample was received by the laboratory/organization performing the testing: 07/17/2024
The quantity of what the sample constitutes: 100 Totes
A brief description of the sample: 2 pints 204,CHP,8020,Z-CURE
From where was the sample collected: Source
Laboratory sample identification: 000097KBP
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia

Material Information

Mfg. Lot Number(s): 24-70-091190
Batch number: 0
Mix number: 0
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2024-07-17-62-1
Test Method: CONCLP 4-16: HMWM
Verified Date: 08/27/2024
Date Tested: 08/09/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: CTM 551 (PCC-SSD Bond Strength) & ASTM C679 (Tack Free Time) accepted vendor's results.
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity (ASTM D 2196) Brookfield RVT with UL adapter, 50 RPM @ 77 deg F, 25 max cps @ 77 deg F 19.46
Specific gravity (ASTM D 1475) 0.90 min @ 77 deg F 9
Volatile content (ASTM D 2369) 30% max 8.10
Flash point (ASTM D 3828) more than 180 deg F 190
PCC - SSD bond strength (CA Test 551) 500 psi minimum @ 24 hours 659
Tack free time, 400 minutes max 376