Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000002 DEA: 010M6404 EFIS: 0123000051
QA Service Level: 1
DIST-CO-RTE-PM: 01-LAK-29-R45.1/52.5
Work Description: RHMA-G, COLD PLANE AC PAVEMENT, AND PAVEMENT DELINEATION.
Location Description: LAKE COUNTY NEAR LAKEPORT FROM PARK WAY OVERCROSSING TO ROUTE 20
Contractor Name: ARGONAUT CONSTRUCTORS , INC.
Contractor Address: 360 Sutton Place, Santa Rosa, CA 95402
Resident Engineer: Daniel Kraft Structure Rep.: Unknown
DIME Sample ID: 2024-07-18-34
TL Number from the TL Form: 802715
Sample Submitted By Organization: CT D01 - District 1 Materials Laboratory
Sample Organization Contact: (707) 496-0974
Type of Sample: Acceptance
Type of Material: Asphalt Rubber Binder
Sample Taken Date: 07/18/2024
Date that the sample was received by the laboratory/organization performing the testing: 07/23/2024
The quantity of what the sample constitutes: 1 can RUBBER BINDER
A brief description of the sample: 1 can PG 64-16 Rubber binder
From where was the sample collected: Source
Laboratory sample identification: 24-124
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite HWY175
Asphalt modifier supplier:
Performance Grade: PG 64-16
Lot number:
Sublot number:
Asphalt Rubber Binder Mix Number:
DIME Test ID: 2024-07-18-34-1
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Verified Date: 07/25/2024
Date Tested: 07/24/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Determination
|
Unworked Penetration
|
|
Unworked Penetration
|
30 0.1 mm
|
DIME Test ID: 2024-07-18-34-2
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 07/25/2024
Date Tested: 07/24/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
ASTM Thermometer used?
|
C
|
|
Softening Point Sample 1
|
74 C
|
|
Softening Point Sample 2
|
74 C
|
|
Bath Liquid
|
freshly boiled distilled water
|
|
Minutes Reaction
|
no data
|
DIME Test ID: 2024-07-18-34-3
Test Method: ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)
Verified Date: 07/25/2024
Date Tested: 07/24/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Temperature
|
25 C
|
|
Ball Penetration (P1)
|
no data0 mm
|
|
Final Dial reading (F1)
|
60 mm
|
|
Ball Penetration (P2)
|
no data0 mm
|
|
Final Dial reading (F2)
|
65 mm
|
|
Ball Penetration (P3)
|
no data0 mm
|
|
Final Dial reading (F3)
|
65 mm
|
|
Resilience 1
|
40 %
|
|
Resilience 2
|
35 %
|
|
Resilience 3
|
35 %
|
|
Average Resilience
|
37 %
|
|
Minutes Reaction
|
no data
|
