Sample Record for 2024-06-30-13
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 994686 DEA: 051K4604 EFIS: 0518000210
QA Service Level: 1
DIST-CO-RTE-PM: 05-SLO-46-29.7/32.2
Work Description: COLD PLANE, PLACE HMA, RHMA, CONC PVMT, MODIFY SIGNAL AND LIGHTING.
Location Description: SAN LUIS OBISPO COUNTY IN PASO ROBLES FROM 300 FEET WEST OF ROUTE 101/46 SEPARATION TO 0.1 MILE EAST OF AIRPORT ROAD
Contractor Name: PAPICH CONSTRUCTION COMPANY, INC.
Contractor Address: 800 FARROLL RD, GROVER BEACH, CA 93433
Resident Engineer: Michael Schmidt Structure Rep.: Ray Barajas
Sample Information
DIME Sample ID: 2024-06-30-13
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Dispute Resolution
Type of Material: Aggregate
Sample Taken Date: 06/30/2024
Date that the sample was received by the laboratory/organization performing the testing: 07/11/2024
The quantity of what the sample constitutes: 8 boxes of mix, Two bags aggs, 1 bag of rap, two quart cans of oil
A brief description of the sample: 3/4" HMA-A 15% RAP PG 64-28PM w/LAS
From where was the sample collected: Job Site
Laboratory sample identification: 024-050
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SPM-Avenal
Material Information
Source Identification (SMARA, name of Pit or Job Site): 91-10-0006
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Jobsite
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number: 1
Sublot number: 1
Aggregate Mix Number:
Test Results
Test 1 of 7
DIME Test ID: 2024-06-30-13-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 07/19/2024
Date Tested: 07/16/2024
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ryan.kester@dot.ca.gov
Organization Phone: (916) 227-7215
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
What type of gradation is being tested?
|
HMA Gradation
|
|
Individual mass retained on the 2 in. sieve
|
no data
|
|
Individual mass retained on the 1 1/2 in. sieve
|
no data0 grams
|
|
Individual mass retained on the 1 in. sieve
|
no data0 grams
|
|
Individual mass retained on the 3/4 in. sieve
|
54.7 grams
|
|
Individual mass retained on the 1/2 in. sieve
|
794 grams
|
|
Individual mass retained on the 3/8 in. sieve
|
852.9 grams
|
|
Individual mass retained on the #4 sieve
|
1105.1 grams
|
|
Individual mass retained on the #8 sieve
|
110.6 grams
|
|
Individual mass retained on the #16 sieve
|
70.5 grams
|
|
Individual mass retained on the #30 sieve
|
40.4 grams
|
|
Individual mass retained on the #50 sieve
|
24.6 grams
|
|
Individual mass retained on the #100 sieve
|
16.1 grams
|
|
Individual mass retained on the #200 sieve
|
13.5 grams
|
|
Individual mass retained on the pan
|
0.9 grams
|
|
Cumulative percent passing the 2 in. sieve
|
no data
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
99 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
84 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
68 %
|
|
Cumulative percent passing the #4 sieve
|
47 %
|
|
Cumulative percent passing the #8 sieve
|
30 %
|
|
Cumulative percent passing the #16 sieve
|
19 %
|
|
Cumulative percent passing the #30 sieve
|
13 %
|
|
Cumulative percent passing the #50 sieve
|
9 %
|
|
Cumulative percent passing the #100 sieve
|
7 %
|
|
Cumulative percent passing the #200 sieve
|
4.5 %
|
Test 2 of 7
DIME Test ID: 2024-06-30-13-2
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Verified Date: 07/19/2024
Date Tested: 07/16/2024
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ryan.kester@dot.ca.gov
Organization Phone: (916) 227-7215
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Bulk specific gravity
|
2.473
|
|
Bulk specific gravity (SSD Basis)
|
2.561
|
|
Apparent specific gravity
|
2.710
|
|
Absorption
|
3.5 %
|
Test 3 of 7
DIME Test ID: 2024-06-30-13-3
Test Method: AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)
Verified Date: 07/19/2024
Date Tested: 07/16/2024
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ryan.kester@dot.ca.gov
Organization Phone: (916) 227-7215
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Basis for relative density testing
|
Bulk
|
|
Specific Gravity
|
2.581
|
|
Absorption
|
1.9 %
|
Test 4 of 7
DIME Test ID: 2024-06-30-13-4
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
Data has not been verified.
Test 5 of 7
DIME Test ID: 2024-06-30-13-5
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
Data has not been verified.
Test 6 of 7
DIME Test ID: 2024-06-30-13-6
Test Method: AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
Data has not been verified.
Test 7 of 7
DIME Test ID: 2024-06-30-13-7
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
Data has not been verified.
