Print Report | Back to Sample Detail

Sample Record for 2024-07-01-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994330 DEA: 09366404 EFIS: 0916000006 QA Service Level: 1
DIST-CO-RTE-PM: 09-MNO-395-58.2/60.4
Work Description: HOT MIX ASPHALT (TYPE A), IMPORTED BORROW, AND ROADWAY EXCAVATION.
Location Description: MONO COUNTY ABOUT 6 MILES NORTH OF LEE VINING FROM ROUTE 167 TO 0.4 MILE NORTH OF CONWAY RANCH ROAD
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 500 South Main Street, Bishop, CA 93514
Resident Engineer: David Carruba Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-07-01-3
TL Number from the TL Form:
Sample Submitted By Organization: CT D09 - Bishop Field Laboratory
Sample Organization Contact: (760) 872-5211
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/01/2024
Date that the sample was received by the laboratory/organization performing the testing: 07/01/2024
The quantity of what the sample constitutes: 24 Boxes - Hot Drop
A brief description of the sample: 3/8" HMA
From where was the sample collected: Source
Laboratory sample identification: HMA-01
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Lee Vining

Material Information

HMA Type: Type A HMA
HMA Grading: 3/8 inch
Lot number:
Sublot number:
HMA Mix Number:
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 0

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2024-07-01-3-1AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)07/01/2024Not scheduledJeffery PuenteCT D09 - Bishop Field LaboratoryDerek Carrington
2024-07-01-3-2AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)07/01/2024Not scheduledJeffery PuenteCT D09 - Bishop Field LaboratoryDerek Carrington
2024-07-01-3-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)07/01/2024Not scheduledJeffery PuenteCT D09 - Bishop Field LaboratoryDerek Carrington
2024-07-01-3-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)07/01/2024Not scheduledJeffery PuenteCT D09 - Bishop Field LaboratoryDerek Carrington
2024-07-01-3-5AASHTO T166-16: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens (Method A)07/01/2024Not scheduledJeffery PuenteCT D09 - Bishop Field LaboratoryDerek Carrington
2024-07-01-3-6AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)07/01/2024Not scheduledJeffery PuenteCT D09 - Bishop Field LaboratoryDerek Carrington