Print Report | Back to Sample Detail

Sample Record for 2024-06-17-103

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 995255 DEA: 041J9604 EFIS: 0414000403 QA Service Level: 1
DIST-CO-RTE-PM: 04-MRN-1-22.8/33.0,45.0/50.5
Work Description: COLD PLANE, RHMA, HMA, MGS, CURB RAMPS, SIDEWALKS, AND CULVERTS.
Location Description: MARIN COUNTY IN AND NEAR POINT REYES STATION FROM FIVE BROOKS TO 1.9 MILES NORTH OF CYPRESS ROAD AND IN AND NEAR TOMALES FROM 0.2 MILES SOUTH OF TOMALES TO 4.4 MILES NORTH OF TOMALES
Contractor Name: O.C. JONES & SONS, INC.
Contractor Address: Unknown
Resident Engineer: Andrew Wong Structure Rep.: Jeremy Light

Sample Information

DIME Sample ID: 2024-06-17-103
TL Number from the TL Form: Rich_24_078
Sample Submitted By Organization: CT D04 - Richmond Field Laboratory
Sample Organization Contact: (510) 231-7151
Type of Sample: Independent Assurance
Type of Material: Aggregate
Sample Taken Date: 06/17/2024
Date that the sample was received by the laboratory/organization performing the testing: 06/26/2024
The quantity of what the sample constitutes: 1 Bag
A brief description of the sample: Class 2 AB Aggregates
From where was the sample collected: Manufacturer
Laboratory sample identification: Rich_24_078
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Stony point/ Roblar Quarry

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-49-0045
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile @ Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number: Virgen Class 2 AB

Test Results

Test 1 of 1

DIME Test ID: 2024-06-17-103-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 06/26/2024
Date Tested: 06/26/2024
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Boulevard,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94508
Organization Email: santiago.sequeira@dot.ca.gov
Organization Phone: (510) 385-7641
General Comments for this Test: S.E Average 60
Test Result Compliance: complies
Additional Comments When Verified:
What type of gradation is being tested? Combined Gradation
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 94 %
Cumulative percent passing the 1/2 in. sieve 80 %
Cumulative percent passing the 3/8 in. sieve 73 %
Cumulative percent passing the #4 sieve 44 %
Cumulative percent passing the #8 sieve 58 %
Cumulative percent passing the #16 sieve 38 %
Cumulative percent passing the #30 sieve 28 %
Cumulative percent passing the #50 sieve 22 %
Cumulative percent passing the #100 sieve 19 %
Cumulative percent passing the #200 sieve 16 %