Print Report | Back to Sample Detail

Sample Record for 2024-06-20-108

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 995255 DEA: 041J9604 EFIS: 0414000403 QA Service Level: 1
DIST-CO-RTE-PM: 04-MRN-1-22.8/33.0,45.0/50.5
Work Description: COLD PLANE, RHMA, HMA, MGS, CURB RAMPS, SIDEWALKS, AND CULVERTS.
Location Description: MARIN COUNTY IN AND NEAR POINT REYES STATION FROM FIVE BROOKS TO 1.9 MILES NORTH OF CYPRESS ROAD AND IN AND NEAR TOMALES FROM 0.2 MILES SOUTH OF TOMALES TO 4.4 MILES NORTH OF TOMALES
Contractor Name: O.C. JONES & SONS, INC.
Contractor Address: Unknown
Resident Engineer: Andrew Wong Structure Rep.: Jeremy Light

Sample Information

DIME Sample ID: 2024-06-20-108
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Richmond Field Laboratory
Sample Organization Contact: (510) 231-7151
Type of Sample: Independent Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/20/2024
Date that the sample was received by the laboratory/organization performing the testing: 06/20/2024
The quantity of what the sample constitutes: 2 boxes
A brief description of the sample: HMA Hot mix
From where was the sample collected: Job Site
Laboratory sample identification: Rich_24_077
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: 700SWP-16

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 1
HMA Mix Number:
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2024-06-20-108-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 06/26/2024
Date Tested: 06/25/2024
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Boulevard,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94508
Organization Email: santiago.sequeira@dot.ca.gov
Organization Phone: (510) 385-7641
General Comments for this Test: Lot 1 SL 1 Field Sample
Test Result Compliance: complies
Additional Comments When Verified:
Number of Samples 2
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7378 grams
Mass of oven-dry sample in air for Sample 1 2534.5 grams
Mass of container filled with the sample and water for Sample 1 8932.5 grams
Mass of container filled with water 2 7378 grams
Mass of oven-dry sample in air for Sample 2 2590.3 grams
Mass of container filled with the sample and water for Sample 2 8969.4 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.586
Specific Gravity for Sample 2 2.593
Average Specific Gravity 2.59
Theoretical maximum density at 25°C (77°F) 2582 kg/m^3