Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 995240 DEA: 060X3804 EFIS: 0618000060
QA Service Level: 1
DIST-CO-RTE-PM: 06-KER-166-0.0/10.2
Work Description: COLD PLANE, PLACE HMA AND CONCRETE PAVEMENT, MODIFY DRAINAGE SYSTEM.
Location Description: KERN COUNTY IN AND NEAR MARICOPA FROM SOUTH JUNCTION ROUTE 33 TO 2.3 MILES WEST OF SAN EMIGDIO CREEK BRIDGE
Contractor Name: GRIFFITH COMPANY
Contractor Address: 12200 Bloomfield Ave, Santa Fe Springs, CA 90670
Resident Engineer: Kayode Arowosegbe Structure Rep.: Travis Landis
DIME Sample ID: 2024-06-11-14
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Sample Organization Contact: 661-549-8281
Type of Sample: Acceptance
Type of Material: Soil
Sample Taken Date: 06/11/2024
Date that the sample was received by the laboratory/organization performing the testing: 06/11/2024
The quantity of what the sample constitutes: 40 lbs Native Soil
A brief description of the sample: Native Soil
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Collected at jobsite
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: CTM 231 test location
Where the material sample would have been placed if not sampled:
DIME Test ID: 2024-06-11-14-1
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Verified Date: 06/11/2024
Date Tested: 06/11/2024
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
Standard Count Density
|
1865 g/cc
|
Count or Density 1
|
1017 g/cc
|
Count or Density 2
|
1082 g/cc
|
Count or Density 3
|
1125 g/cc
|
Standard Count Moisture
|
624 g/cc
|
Moisture Count 1
|
181 g/cc
|
Moisture Count 2
|
187 g/cc
|
Moisture Count 3
|
180 g/cc
|
Sum of Count or Density
|
3224.00 g/cc
|
Average of Count or Density
|
1075.00 g/cc
|
Sum of Moisture Count
|
548.00 g/cc
|
Average of Moisture Count
|
183.00 g/cc
|
Count Ratio Density
|
0.58
|
Count Ratio Moisture
|
0.29
|
Calculated Percent Relative Compaction
|
93.1 %
|
Reported Percent Relative Compaction
|
93 %
|
DIME Test ID: 2024-06-11-14-2
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 06/11/2024
Date Tested: 06/11/2024
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
Is oversize material
|
No
|
In-place wet density
|
2.02
|
Highest adjust wet density
|
2.17
|
Relative compaction
|
93
|
% Moisture
|
no data
|
Optimum Moisture
|
no data
|