Print Report | Back to Sample Detail

Sample Record for 2024-06-05-26

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994657 DEA: 09382104 EFIS: 0919000035 QA Service Level: 1
DIST-CO-RTE-PM: 09-INY-168-17.5/17.8
Work Description: PLACE HMA AND CONSTRUCT CONCRETE CURB RAMPS AND SIDEWALK.
Location Description: INYO COUNTY IN AND NEAR BISHOP FROM 0.1 MILE WEST OF PIONEER LANE TO SUNLAND DRIVE
Contractor Name: INTERSTATE CIVIL CONSTRUCTION
Contractor Address: 1253 Evergreen Rd, Suite 2, Wrightwood, CA 92397.
Resident Engineer: Adam Zumstein Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-06-05-26
TL Number from the TL Form:
Sample Submitted By Organization: CT D09 - Bishop Field Laboratory
Sample Organization Contact: (760) 872-5211
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 06/05/2024
Date that the sample was received by the laboratory/organization performing the testing: 06/06/2024
The quantity of what the sample constitutes: 1 bag
A brief description of the sample: Class II Base
From where was the sample collected: Source
Laboratory sample identification: CBII 1
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: 7/11 Materials

Material Information

Source Identification (SMARA, name of Pit or Job Site): 7/11 Materials Coyote Pit
The fabricator's/manufacturer's product name for the sample: Class II Base
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile @ Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2024-06-05-26-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 06/14/2024
Date Tested: 06/11/2024
Submitted By Organization: CT D09 - Bishop Field Laboratory
Organization Address: 500 South Main Street,
Organization City: Bishop
Organization State: CA
Organization Zipcode: 93514
Organization Email: chris.talbot@dot.ca.gov
Organization Phone: (760) 872-0794
General Comments for this Test: AB-01
Test Result Compliance: does not comply
Additional Comments When Verified:
What type of gradation is being tested? Combined Gradation
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 98 %
Cumulative percent passing the 1/2 in. sieve 92 %
Cumulative percent passing the 3/8 in. sieve 89 %
Cumulative percent passing the #4 sieve 77 %
Cumulative percent passing the #8 sieve 62 %
Cumulative percent passing the #16 sieve 46 %
Cumulative percent passing the #30 sieve 31 %
Cumulative percent passing the #50 sieve 20 %
Cumulative percent passing the #100 sieve 21 %
Cumulative percent passing the #200 sieve 8.3 %

Test 2 of 2

DIME Test ID: 2024-06-05-26-2
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 06/14/2024
Date Tested: 06/11/2024
Submitted By Organization: CT D09 - Bishop Field Laboratory
Organization Address: 500 South Main Street,
Organization City: Bishop
Organization State: CA
Organization Zipcode: 93514
Organization Email: chris.talbot@dot.ca.gov
Organization Phone: (760) 872-0794
General Comments for this Test: AB-01
Test Result Compliance: complies
Additional Comments When Verified:
Sand Equivalent 33