Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994857 DEA: 010H6104 EFIS: 0117000241
QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM-36-13.5/R36.1
Work Description: COLD PLANE AND OVERLAY HMA, & REPLACE GUARDRAILS.
Location Description: HUMBOLDT COUNTY AT AND NEAR BRIDGEVILLE FROM 3.4 MILES WEST OF GRIZZLY CREEK BRIDGE TO 0.8 MILE EAST OF SOUTH FORK VAN DUZEN RIVER
Contractor Name: MERCER FRASER COMPANY
Contractor Address: PO Box 1006, Eureka, CA 95502
Resident Engineer: Joaquin Rodriquez Structure Rep.: Ryan Duran
DIME Sample ID: 2024-05-29-34
TL Number from the TL Form: 971763
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Rubber Binder
Sample Taken Date: 05/29/2024
Date that the sample was received by the laboratory/organization performing the testing: 05/30/2024
The quantity of what the sample constitutes: 1 can RUBBER BINDER
A brief description of the sample: 1 can PG 64-16 binder
From where was the sample collected: Source
Laboratory sample identification: 24-085
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Mercer Fraser Plant B
Asphalt modifier supplier:
Performance Grade: PG 64-16
Lot number:
Sublot number:
Asphalt Rubber Binder Mix Number:
DIME Test ID: 2024-05-29-34-1
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Verified Date: 06/03/2024
Date Tested: 06/03/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: PENETRATION
Test Result Compliance: complies
Additional Comments When Verified:
Determination
|
Unworked Penetration
|
Unworked Penetration
|
34 0.1 mm
|
DIME Test ID: 2024-05-29-34-2
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 06/03/2024
Date Tested: 06/03/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: SOFTEINING POINT
Test Result Compliance: complies
Additional Comments When Verified:
ASTM Thermometer used?
|
C
|
Softening Point Sample 1
|
66 C
|
Softening Point Sample 2
|
67 C
|
Bath Liquid
|
freshly boiled distilled water
|
Minutes Reaction
|
no data
|
DIME Test ID: 2024-05-29-34-3
Test Method: ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)
Verified Date: 06/03/2024
Date Tested: 06/03/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: RESILIENCE
Test Result Compliance: complies
Additional Comments When Verified:
Temperature
|
25 C
|
Final Dial reading (F1)
|
66 mm
|
Ball Penetration (P1)
|
1 mm
|
Final Dial reading (F2)
|
70 mm
|
Ball Penetration (P2)
|
0 mm
|
Final Dial reading (F3)
|
65 mm
|
Ball Penetration (P3)
|
0 mm
|
Resilience 1
|
35 %
|
Resilience 2
|
30 %
|
Resilience 3
|
35 %
|
Average Resilience
|
33 %
|
Minutes Reaction
|
no data
|