Print Report | Back to Sample Detail

Sample Record for 2024-05-13-80

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66669 DEA: JMF-DATA EFIS: JMF-DATA QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for storing JMF sample data
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-05-13-80
TL Number from the TL Form:
Sample Submitted By Organization: Martin Marietta
Sample Organization Contact: (619) 455-3295
Type of Sample: Quality Control
Type of Material: Antistrip Additive
Sample Taken Date: 05/13/2024
Date that the sample was received by the laboratory/organization performing the testing: 05/13/2024
The quantity of what the sample constitutes: 1 can of LAS
A brief description of the sample: Morlife 5000
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Ingevity

Material Information

Antistrip Type: LAS - liquid antistrip
Antistrip Additive Mix Number:

Test Results

Test 1 of 3

DIME Test ID: 2024-05-13-80-1
Test Method: ASTM D2074-07r13: Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method (Amine)
Verified Date: 06/03/2024
Date Tested: 05/13/2024
Submitted By Organization: Martin Marietta
Organization Address: 4211 Ponderosa Avenue, Suite C,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92124
Organization Email: andrew.suarez@martinmarietta.com
Organization Phone: (619) 455-3295
General Comments for this Test: Submitted from JMF - Andrew Suarez
Test Result Compliance:
Additional Comments When Verified:
Total Amine Value 758
Titration S amine value of secondary and tertiary amine groups no data
Titration T amine value of tertiary amine groups no data

Test 2 of 3

DIME Test ID: 2024-05-13-80-2
Test Method: ASTM D5095-91r13: Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments (Content)
Verified Date: 06/03/2024
Date Tested: 05/13/2024
Submitted By Organization: Martin Marietta
Organization Address: 4211 Ponderosa Avenue, Suite C,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92124
Organization Email: andrew.suarez@martinmarietta.com
Organization Phone: (619) 455-3295
General Comments for this Test: Submitted from JMF - Andrew Suarez
Test Result Compliance:
Additional Comments When Verified:
Nonvolatile Content of Test Specimen 27 percent

Test 3 of 3

DIME Test ID: 2024-05-13-80-3
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 06/03/2024
Date Tested: 05/21/2024
Submitted By Organization: Martin Marietta
Organization Address: 4211 Ponderosa Avenue, Suite C,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92124
Organization Email: andrew.suarez@martinmarietta.com
Organization Phone: (619) 455-3295
General Comments for this Test: Submitted from JMF - Andrew Suarez
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 2 in. sieve no data
Cumulative percent passing the 1 1/2 in. sieve no data
Cumulative percent passing the 1 in. sieve no data
Cumulative percent passing the 3/4 in. sieve no data
Cumulative percent passing the 1/2 in. sieve no data
Cumulative percent passing the 3/8 in. sieve no data
Cumulative percent passing the #4 sieve no data
Cumulative percent passing the #8 sieve no data
Cumulative percent passing the #16 sieve no data
Cumulative percent passing the #30 sieve no data
Cumulative percent passing the #50 sieve no data
Cumulative percent passing the #100 sieve no data
Cumulative percent passing the #200 sieve no data