Project Information

Project ID: 66669 DEA: JMF-DATA EFIS: JMF-DATA QA Service Level:

DIST-CO-RTE-PM: 59---

Work Description: Special project for storing JMF sample data

Location Description:

Contractor Name: Unknown

Contractor Address: Unknown

Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-05-13-77

TL Number from the TL Form:

Sample Submitted By Organization: Martin Marietta

Sample Organization Contact: (619) 455-3295

Type of Sample: Quality Control

Type of Material: Reclaimed Asphalt Pavement

Sample Taken Date: 05/13/2024

Date that the sample was received by the laboratory/organization performing the testing: 05/13/2024

The quantity of what the sample constitutes: 50lbs of RAP

A brief description of the sample: RAP

From where was the sample collected: Source

Laboratory sample identification:

Structure unique identifier:

Structure name:

The fabricator/manufacturer/facility name: Martin Marietta - Santee

Material Information

RAP Source: Martin Marietta - Lakeside

Aggregate Size:

Aggregate Source:

RAP Stockpile:

Stockpile Size (tons):

Reclaimed Asphalt Pavement Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2024-05-13-77-1

Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)

Verified Date: 06/03/2024

Date Tested: 05/13/2024

Submitted By Organization: Martin Marietta

Organization Address: 4211 Ponderosa Avenue, Suite C,

Organization City: San Diego

Organization State: CA

Organization Zipcode: 92124

Organization Email: andrew.suarez@martinmarietta.com

Organization Phone: (619) 455-3295

General Comments for this Test: Submitted from JMF - Andrew Suarez

Test Result Compliance:

Additional Comments When Verified:

Is an aggregate correction factor used?	No
Cumulative percent passing the 2 in. sieve	no data
Cumulative percent passing the 1 1/2 in. sieve	100 %
Cumulative percent passing the 1 in. sieve	100 %
Cumulative percent passing the 3/4 in. sieve	100 %
Cumulative percent passing the 1/2 in. sieve	96 %
Cumulative percent passing the 3/8 in. sieve	87 %
Cumulative percent passing the #4 sieve	61 %
Cumulative percent passing the #8 sieve	44 %
Cumulative percent passing the #16 sieve	34 %
Cumulative percent passing the #30 sieve	25 %
Cumulative percent passing the #50 sieve	18 %
Cumulative percent passing the #100 sieve	12 %
Cumulative percent passing the #200 sieve	7.7 %

Test 2 of 2

DIME Test ID: 2024-05-13-77-2

Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)