Print Report | Back to Sample Detail

Sample Record for 2024-05-13-74

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66669 DEA: JMF-DATA EFIS: JMF-DATA QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for storing JMF sample data
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-05-13-74
TL Number from the TL Form:
Sample Submitted By Organization: Martin Marietta
Sample Organization Contact: (619) 455-3295
Type of Sample: Quality Control
Type of Material: Reclaimed Asphalt Pavement
Sample Taken Date: 05/13/2024
Date that the sample was received by the laboratory/organization performing the testing: 05/13/2024
The quantity of what the sample constitutes: 50lbs of RAP
A brief description of the sample: RAP
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Martin Marietta - Santee

Material Information

RAP Source: Martin Marietta - Lakeside
Aggregate Size:
Aggregate Source:
RAP Stockpile:
Stockpile Size (tons):
Reclaimed Asphalt Pavement Mix Number:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2024-05-13-74-1
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 06/03/2024
Date Tested: 05/13/2024
Submitted By Organization: Martin Marietta
Organization Address: 4211 Ponderosa Avenue, Suite C,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92124
Organization Email: andrew.suarez@martinmarietta.com
Organization Phone: (619) 455-3295
General Comments for this Test: Submitted from JMF - Andrew Suarez
Test Result Compliance:
Additional Comments When Verified:
Is an aggregate correction factor used? No
Cumulative percent passing the 2 in. sieve no data
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 98 %
Cumulative percent passing the 3/8 in. sieve 89 %
Cumulative percent passing the #4 sieve 65 %
Cumulative percent passing the #8 sieve 47 %
Cumulative percent passing the #16 sieve 36 %
Cumulative percent passing the #30 sieve 27 %
Cumulative percent passing the #50 sieve 19 %
Cumulative percent passing the #100 sieve 13 %
Cumulative percent passing the #200 sieve 9.3 %

Test 2 of 2

DIME Test ID: 2024-05-13-74-2
Test Method: AASHTO T164-14: Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA) (Asphalt Binder Content)
Verified Date: 06/03/2024
Date Tested: 05/13/2024
Submitted By Organization: Martin Marietta
Organization Address: 4211 Ponderosa Avenue, Suite C,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92124
Organization Email: andrew.suarez@martinmarietta.com
Organization Phone: (619) 455-3295
General Comments for this Test: Submitted from JMF - Andrew Suarez
Test Result Compliance:
Additional Comments When Verified:
Corrected Asphalt Binder Content 4.84 %