Print Report | Back to Sample Detail

Sample Record for 2024-05-09-46

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994532 DEA: 010E8904 EFIS: 0115000043 QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM, -101,299-88.3,0.0
Work Description: Arcata 101 Merge Improvements
Location Description: HUMBOLDT COUNTY IN ARCATA AT ROUTE 299/101 SEPARATION
Contractor Name: SHASTA SERVICES, INC. DBA TIMBERWORKS
Contractor Address: 509 S. Mt. Shasta Blvd., Mt. Shasta, CA 96067
Resident Engineer: Ryan Dunne Structure Rep.: Adlai Evans

Sample Information

DIME Sample ID: 2024-05-09-46
TL Number from the TL Form:
Sample Submitted By Organization: CT D01 - District 1 Materials Laboratory
Sample Organization Contact: (707) 496-0974
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/09/2024
Date that the sample was received by the laboratory/organization performing the testing: 05/10/2024
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 1/2 HMA-A 15% RAP PG64-16
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kernen

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2024-05-09-46-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 05/14/2024
Date Tested: 05/13/2024
Submitted By Organization: CT D01 - District 1 Materials Laboratory
Organization Address: 1726 Albee Street,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 496-0974
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 1739.3 g
Corrected Asphalt Binder Content 5.37 %
Mass Loss 109.3 g
Correction Factor (Percent by mass of HMA Specimen) 0.91 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 482 C