DEPARTMENT OF TRANSPORTATION

DIVISION OF ENGINEERING SERVICES

MATERIALS ENGINEERING AND TESTING SERVICES

Concrete Materials Testing Branch

5900 Folsom Blvd.

Sacramento, CA 95819

916-227-7205

Contract # 034H5814 Cty SAC Rte 5 PM 27.6/29.5,30.4/34.3

Vendor #

	REPORT OF LABORATORY TESTING
Resident Engineer:	Hani Eissa	Date Reported:	06/24/2024
Address:		TL Number:
City:
Project Name: ROADWAY EXCAVATION, PLACE CL2 AB, HMA & RHMA, & MODIFY RAMP METERS.
Prime Contractor: DeSILVA GATES CONSTRUCTION
Sample Taken Date:	05/13/2024	Mix Design:	1615674
Contractor: Unknown		Location : SACRAMENTO COUNTY IN AND NEAR SACRAMENTO FROM 0.5 MILES SOUTH OF ARENA BOULEVARD OVERCROSSING TO 0.4 MILES SOUTH OF 99/5 INTERCHANGE AND FROM 0.5 MILES NORTH OF THE 99/5 INTERCHANGE TO 0.4 MILE SOUTH OF THE YOLO COUNTY LINE
Structure unique identifier:
Structure name:
Location of Pour: Arena Blvd Structural Concrete Face

The following testing has been tested in accordance with:

ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

Capped in accordance with ASTM C617/CTM521

Cured in accordance with ASTM C511

Specimen	Average diameter of cylinder (in)	Cross sectional area of cylinder (in^2)	Maximum load on cylinder (lb)	Compressive strength of cylinder (psi)	Type of fracture pattern of cylinder
1	4.02	12.69	66728	5257.0	1
2	4.01	12.63	65096	5154.0	2
3	4.01	12.63	68659	5437	1

DIME Test ID: 2024-05-13-20-3
Number of specimens: 3
Compressive strength (to nearest 10 psi): 5280
Age of specimen: 28 days
Certified By: Spencer Adams

ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

Capped in accordance with ASTM C617/CTM521

Cured in accordance with ASTM C511

Specimen	Average diameter of cylinder (in)	Cross sectional area of cylinder (in^2)	Maximum load on cylinder (lb)	Compressive strength of cylinder (psi)	Type of fracture pattern of cylinder
1	4.02	12.69	65650	5172.0	1
2	4.01	12.63	67259	5326.0	1
3	4.01	12.63	71067	5627	1

DIME Test ID: 2024-05-13-20-4
Number of specimens: 3
Compressive strength (to nearest 10 psi): 5380
Age of specimen: 42 days
Certified By: Spencer Adams

Summary of Items Observed and Conversations:

Comments: This report is for the purpose of reporting test results.
Should you require recommendations concerning repairs or remedial efforts please contact the METS representative,
who represents the Materials Engineering and Testing Services for your project.


*Subject to final inspection by the Resident Engineer.

TL- Report of Laboratory Testing

DEPARTMENT OF TRANSPORTATION

Summary of Items Observed and Conversations:

Comments: This report is for the purpose of reporting test results. Should you require recommendations concerning repairs or remedial efforts please contact the METS representative, who represents the Materials Engineering and Testing Services for your project.

Comments: This report is for the purpose of reporting test results.
Should you require recommendations concerning repairs or remedial efforts please contact the METS representative,
who represents the Materials Engineering and Testing Services for your project.