Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994245 DEA: 051H4304 EFIS: 0516000073
QA Service Level: 1
DIST-CO-RTE-PM: 05-SB-101-21.4/21.9
Work Description: San Jose Creek Bridge replacement
Location Description: SANTA BARBARA COUNTY IN GOLETA FROM ROUTE 101/217 SEPARATION TO 0.3 MILE NORTH OF SAN JOSE CREEK BRIDGE
Contractor Name: MCM CONSTRUCTION
Contractor Address: 6413 32nd Street, North Highlands, Ca 95660
Resident Engineer: Manny Yogarajah Structure Rep.: Fabian Velasco
DIME Sample ID: 2023-11-14-100
TL Number from the TL Form:
Sample Submitted By Organization: Con-Fab California, LLC
Sample Organization Contact: (661) 630-7162
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 11/14/2023
Date that the sample was received by the laboratory/organization performing the testing: 11/14/2023
The quantity of what the sample constitutes: 1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
A brief description of the sample: 1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Con-Fab California, LLC Shafter
Source Identification (SMARA, name of Pit or Job Site): Con-Fab California, LLC
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile at the Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
DIME Test ID: 2023-11-14-100-1
Test Method: ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Verified Date: 06/11/2024
Date Tested: 11/14/2023
Submitted By Organization: Con-Fab California, LLC
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: trevorl@confabca.com
Organization Phone: (661) 630-3281
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested?
|
Combined Gradation
|
Cumulative percent passing the 2 in. sieve
|
100 %
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
Cumulative percent passing the 1/2 in. sieve
|
94.7 %
|
Cumulative percent passing the 3/8 in. sieve
|
71.5 %
|
Cumulative percent passing the #4 sieve
|
56.7 %
|
Cumulative percent passing the #8 sieve
|
43.7 %
|
Cumulative percent passing the #16 sieve
|
31.8 %
|
Cumulative percent passing the #30 sieve
|
22 %
|
Cumulative percent passing the #50 sieve
|
10.7 %
|
Cumulative percent passing the #100 sieve
|
2.8 %
|
Cumulative percent passing the #200 sieve
|
0.9 %
|
DIME Test ID: 2023-11-14-100-2
Test Method: ASTM D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
Verified Date: 06/11/2024
Date Tested: 11/14/2023
Submitted By Organization: Con-Fab California, LLC
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: trevorl@confabca.com
Organization Phone: (661) 630-3281
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
DIME Test ID: 2023-11-14-100-3
Test Method: ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Verified Date: 06/11/2024
Date Tested: 11/14/2023
Submitted By Organization: Con-Fab California, LLC
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: trevorl@confabca.com
Organization Phone: (661) 630-3281
General Comments for this Test: Sand 1.7%, 3/8 inch rock 1.1%, 1/2 inch rock .8%
Test Result Compliance:
Additional Comments When Verified:
Percent finer than No. 200 sieve
|
1.7 %
|
DIME Test ID: 2023-11-14-100-4
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 06/11/2024
Date Tested: 11/14/2023
Submitted By Organization: Con-Fab California, LLC
Organization Address: 701 Golds Avenue,
Organization City: Shafter
Organization State: CA
Organization Zipcode: 93263
Organization Email: trevorl@confabca.com
Organization Phone: (661) 630-3281
General Comments for this Test: Sand 7.0%, 3/8 inch rock 1.5%, 1/2 inch rock 1.3%
Test Result Compliance:
Additional Comments When Verified:
Total evaporable moisture content
|
7 %
|