Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994593 DEA: 081M1804 EFIS: 0821000087
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-10,74,79,86,111,243-Var
Work Description: POLYESTER CONCRETE AND HOT MIX ASPHALT OVERLAY.
Location Description: RIVERSIDE COUNTY AT VARIOUS LOCATIONS
Contractor Name: TRUESDELL CORPORATION OF CALIFORNIA, INC.
Contractor Address: Unknown
Resident Engineer: Md Rahman Structure Rep.: Unknown
DIME Sample ID: 2024-04-23-57
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/23/2024
Date that the sample was received by the laboratory/organization performing the testing: 04/30/2024
The quantity of what the sample constitutes: 3 BOXES OF HMA, 2 QTS OIL
A brief description of the sample: 3 HMA-A R24 0.25% EVO/
From where was the sample collected: Manufacturer
Laboratory sample identification: 0207A-24
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Martin Marietta -Coachella
DIME Test ID: 2024-04-23-57-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 05/06/2024
Date Tested: 05/03/2024
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
2111 g
|
|
Corrected Asphalt Binder Content
|
4.78 %
|
|
Mass Loss
|
110.8 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.33 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.14 %
|
|
Test Temperature
|
538 C
|