Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994820 DEA: 060V1104 EFIS: 0616000208
QA Service Level: 1
DIST-CO-RTE-PM: 06-FRE,KIN-5,41,198-Var
Work Description: STRATFORD KINGS RIVER BRIDGE REPLACEMENT.
Location Description: FRESNO AND KINGS COUNTIES AT VARIOUS LOCATIONS
Contractor Name: M.C.M. Construction, INC. (Richard McCall)
Contractor Address: 6413 32nd Street, North Highlands, Ca 95660
Resident Engineer: Din Dadawalla Structure Rep.: Martin Garcia
DIME Sample ID: 2024-04-08-42
TL Number from the TL Form:
Sample Submitted By Organization: Con-Fab California Corporation - Lathrop
Sample Organization Contact: (209) 249-4700
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 04/08/2024
Date that the sample was received by the laboratory/organization performing the testing: 04/08/2024
The quantity of what the sample constitutes: 1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
A brief description of the sample: 1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: ConFab Lathrop
Source Identification (SMARA, name of Pit or Job Site): Confab California Lathrop
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile @ Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: K80CP1L
Lot number:
Sublot number:
Aggregate Mix Number:
DIME Test ID: 2024-04-08-42-1
Test Method: ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Verified Date: 04/18/2024
Date Tested: 04/10/2024
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
What type of gradation is being tested?
|
Combined Gradation
|
|
Cumulative percent passing the 2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
95.5 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
79.1 %
|
|
Cumulative percent passing the #4 sieve
|
49.9 %
|
|
Cumulative percent passing the #8 sieve
|
37.1 %
|
|
Cumulative percent passing the #16 sieve
|
25.9 %
|
|
Cumulative percent passing the #30 sieve
|
16.1 %
|
|
Cumulative percent passing the #50 sieve
|
8.3 %
|
|
Cumulative percent passing the #100 sieve
|
3.2 %
|
|
Cumulative percent passing the #200 sieve
|
0.8 %
|
DIME Test ID: 2024-04-08-42-2
Test Method: ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Verified Date: 04/18/2024
Date Tested: 04/10/2024
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: Sand: 1.5%
1/2" Rocks: 0.9%
3/8" Rocks: 1.0%
Test Result Compliance:
Additional Comments When Verified:
|
Percent finer than No. 200 sieve
|
1.5 %
|
DIME Test ID: 2024-04-08-42-3
Test Method: ASTM D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
Verified Date: 04/18/2024
Date Tested: 04/11/2024
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: 83%,83%,85% = 84% Average
Test Result Compliance:
Additional Comments When Verified:
DIME Test ID: 2024-04-08-42-4
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 04/18/2024
Date Tested: 04/08/2024
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: Sand: 4.20%
Rocks: 0.36%
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
4.2 %
|
DIME Test ID: 2024-04-08-42-5
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 04/18/2024
Date Tested: 04/10/2024
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: Sand: 4.85%
Rocks: 0.39%
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
4.9 %
|
DIME Test ID: 2024-04-08-42-6
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 04/18/2024
Date Tested: 04/12/2024
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: Sand: 4.8%
Rocks: 0.37%
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
4.8 %
|
