Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994907 DEA: 120T1204 EFIS: 1222000004
QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA,-57-12.3
Work Description: DECK SPALL REPAIR AND POLYESTER CONCRETE OVERLAY.
Location Description: ORANGE COUNTY IN ANAHEIM AT STADIUM OVERHEAD
Contractor Name: PETERSON-CHASE GENERAL ENGINEERING CONSTRUCTION, INC.
Contractor Address: 16351 Construction Circle West, Irvine, CA 92606
Resident Engineer: Karim Ahmed Structure Rep.: Unknown
DIME Sample ID: 2024-03-26-50
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 03/26/2024
Date that the sample was received by the laboratory/organization performing the testing: 03/27/2024
The quantity of what the sample constitutes: 10 Tankers
A brief description of the sample: 1 gallon can / PPC 1121
From where was the sample collected: Source
Laboratory sample identification: 000050KBP
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia
DIME Test ID: 2024-03-26-50-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 05/13/2024
Date Tested: 04/19/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
DIME Test ID: 2024-03-26-50-2
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 05/13/2024
Date Tested: 04/19/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Density Units
|
pounds/gallons
|
|
Liquid Density (pounds per gallon)
|
9
|
DIME Test ID: 2024-03-26-50-3
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 05/13/2024
Date Tested: 04/03/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted Vendors Results
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of specimens tested
|
5
|
|
Conditioning procedure
|
18/25/50+5/70
|
|
Speed of testing
|
0.45 in/min
|
|
Sample 1 Width
|
0.484 in
|
|
Sample 1 Ultimate strength
|
2893.5 psi
|
|
Sample 1 Thickness
|
0.26 in
|
|
Sample 1 Area
|
0.1258 in^2
|
|
Sample 1 Ultimate Strength Actual
|
364 lbs
|
|
Sample 1 percent elongation
|
60.99 %
|
|
Sample 1 Time
|
no data0 MM:SS
|
|
Sample 2 Width
|
0.483 in
|
|
Sample 2 Thickness
|
0.25 in
|
|
Sample 2 Area
|
0.1208 in^2
|
|
Sample 2 Ultimate strength
|
2980.1 psi
|
|
Sample 2 Ultimate Strength Actual
|
360 lbs
|
|
Sample 2 percent elongation
|
61.63 %
|
|
Sample 2 Time
|
no data0 MM:SS
|
|
Sample 3 Width
|
0.483 in
|
|
Sample 3 Thickness
|
0.267 in
|
|
Sample 3 Area
|
0.129 in^2
|
|
Sample 3 Ultimate strength
|
3023 psi
|
|
Sample 3 Ultimate Strength Actual
|
389.967 lbs
|
|
Sample 3 percent elongation
|
64.91 %
|
|
Sample 3 Time
|
no data0 MM:SS
|
|
Sample 4 Width
|
0.483 in
|
|
Sample 4 Thickness
|
0.259 in
|
|
Sample 4 Area
|
0.1251 in^2
|
|
Sample 4 Ultimate strength
|
2979 psi
|
|
Sample 4 Ultimate Strength Actual
|
372.67 lbs
|
|
Sample 4 percent elongation
|
62 %
|
|
Sample 4 Time
|
no data0 MM:SS
|
|
Sample 5 Width
|
0.483 in
|
|
Sample 5 Thickness
|
0.268 in
|
|
Sample 5 Area
|
0.1294 in^2
|
|
Sample 5 Ultimate strength
|
2921.2 psi
|
|
Sample 5 Ultimate Strength Actual
|
378 lbs
|
|
Sample 5 percent elongation
|
61.44 %
|
|
Sample 5 Time
|
no data0 MM:SS
|
|
Ultimate Strength Average
|
2959 psi
|
|
Percent Elongation Average
|
62 %
|
DIME Test ID: 2024-03-26-50-4
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 05/13/2024
Date Tested: 04/19/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Mean of two volatile content determination
|
46
|
DIME Test ID: 2024-03-26-50-5
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 05/13/2024
Date Tested: 04/02/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted Vendors Results
Test Result Compliance: complies
Additional Comments When Verified:
|
Curing history for Sample 1
|
24hr
|
|
Maximum applied load (P) for Sample 1
|
1117 lb
|
|
Span length for Sample 1
|
9 in
|
|
Break location for Sample 1
|
bond
|
|
Specimen defects/notes for Sample 1
|
no data
|
|
Surface type for Sample 1
|
SSD
|
|
Modulus of rupture (R) for Sample 1
|
558.5 psi
|
|
Curing history for Sample 2
|
24hr
|
|
Maximum applied load (P) for Sample 2
|
1420 lb
|
|
Span length for Sample 2
|
9 in
|
|
Break location for Sample 2
|
bond
|
|
Specimen defects/notes for Sample 2
|
no data
|
|
Surface type for Sample 2
|
SSD
|
|
Modulus of rupture (R) for Sample 2
|
710 psi
|
|
Curing history for Sample 3
|
24hr
|
|
Maximum applied load (P) for Sample 3
|
1229.8 lb
|
|
Span length for Sample 3
|
9 in
|
|
Break location for Sample 3
|
bond
|
|
Specimen defects/notes for Sample 3
|
no data
|
|
Surface type for Sample 3
|
SSD
|
|
Modulus of rupture (R) for Sample 3
|
614.9 psi
|
DIME Test ID: 2024-03-26-50-6
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 05/13/2024
Date Tested: 03/29/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted Vendors Results
Test Result Compliance: complies
Additional Comments When Verified:
|
Diameter of lid
|
153.9 mm
|
|
Room Temperature
|
77 f
|
|
Tare weight
|
no data
|
|
Initial weight
|
100.292 grams
|
|
Weight at 5 minutes
|
100.195 grams
|
|
Weight at 10 minutes
|
100.091 grams
|
|
Weight at 15 minutes
|
99.981 grams
|
|
Weight at 20 minutes
|
99.84 grams
|
|
Weight at 25 minutes
|
99.72 grams
|
|
Weight at 30 minutes
|
99.597 grams
|
|
Final weight
|
99.6 grams
|
|
Total weight loss
|
0.69 grams
|
|
Calculated radius of gallon can lid in cm
|
7.695 cm
|
|
Lid Factor
|
53.757 m^2
|
|
Volatile emission
|
37.2 grams/m^2
|
