Sample Record for 2024-03-29-28
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 995059 DEA: 081G6404 EFIS: 0816000046
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-395-R4.0/49.0
Work Description: REPLACE ASPHALT CONCRETE SURFACING, COLD PLANE AC PVMT AND RHMA.
Location Description: SAN BERNARDINO COUNTY AT VARIOUS LOCATIONS FROM ROUTE 15/395 SEPARATION TO 3.1 MILES NORTH OF ROUTE 58/395 SEPARATION
Contractor Name: SULLY-MILLER CONTRACTING COMPANY
Contractor Address: 135 S State College Blvd, Brea, Ca 92821
Resident Engineer: Shaun Loza Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2024-03-29-28
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 03/29/2024
Date that the sample was received by the laboratory/organization performing the testing: 04/03/2024
The quantity of what the sample constitutes: 11 Bags of untreated Agg, 3 Bags Coldfeed Agg, 2 Bags Rap
A brief description of the sample: JMF 3/4" HMA-A-SP R15 1.0% LSM
From where was the sample collected: Manufacturer
Laboratory sample identification: 0155A-24
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Blue Diamond-Victorville
Material Information
Source Identification (SMARA, name of Pit or Job Site): 91-36-0022, 91-36-0046
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Belt Cut at Blue Diamond Victorville Plant
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: 300154-LSM-PG64-10
Lot number:
Sublot number:
Aggregate Mix Number:
Test Results
Tests Assigned to this Sample
| DIME Test ID | Test Method | Assigned Date | Test Date | Assigned By | Assigned Lab | Test Comments | Assigned To |
| 2024-03-29-28-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | 04/03/2024 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-03-29-28-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | 04/03/2024 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-03-29-28-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | 04/03/2024 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-03-29-28-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | 04/03/2024 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-03-29-28-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | 04/03/2024 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-03-29-28-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | 04/03/2024 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-03-29-28-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | 04/03/2024 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-03-29-28-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | 04/03/2024 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-03-29-28-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | 04/03/2024 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2024-03-29-28-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | 04/03/2024 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
100147100148100149100150100151100152100153100154100155100156