Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994864 DEA: 050N74U4 EFIS: 0522000025
QA Service Level: 1
DIST-CO-RTE-PM: 05-SB-101-9.9/10.6
Work Description: SB 101 4D North San Ysidro to Olive Mill
Location Description: In Santa Barbara County in and near Santa Barbara from 0.1 mile south of San Ysidro Road Overcrossing to 0.1 north of Olive Mill Road Overcrossing
Contractor Name: Craig Flowers (Granite Construction Company)
Contractor Address: PO Box 6744, Santa Barbara, CA 93160
Resident Engineer: Taylor Merlo Structure Rep.: Emiliano Berntsen
DIME Sample ID: 2024-04-03-8
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Quality Assurance
Type of Material: SMTL TM6 - Steel Check Sample Plate
Sample Taken Date: 04/03/2024
Date that the sample was received by the laboratory/organization performing the testing: 04/05/2024
The quantity of what the sample constitutes: 2
A brief description of the sample: Rolled Shape (W24x146)
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Stinger Bridge & Iron
Heat Number(s): 589839
Material Specification: A709
Grade: 50 F2
Thickness: 1.09 Bottom Flange
Shape: W24 x 146
Metal Foundry Manufacturer (Mill): Nucor Yamato Steel
Plate Dimension: 12 x 12
DIME Test ID: 2024-04-03-8-1
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 04/16/2024
Date Tested: 04/16/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | 589839 | 0.499 | 0.19556 | 59108 | 73044 | 34.1 | aauvinen | | 589839 | 0.502 | 0.19792 | 60782 | 73425 | 34.4 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
