Project Information

Project ID: 214649 DEA: 07316004 EFIS: 0715000194 QA Service Level: 1

DIST-CO-RTE-PM: 07-LA-14-60.70

Work Description: REHABILITATION FOR THE ON/OFF RAMPS AND ADJACENT SHOULDERS. UPGRADING METAL BEAM GUARDRAILS, AC DIKES, SIGN PANELS, CURB RAMPS, TRAFFIC LOOPS DETECTORS, AND SOME OTHER HIGHWAY APPURTENANCES.

Location Description: ROUTE 14 FROM PALMDALE BLVD TO KERN COUNTRY LINE.

Contractor Name: Guy F. Atkinson Construction LLC

Contractor Address: 18201 Von Karman Ave, Suite 800, Irvine, CA 92612

Resident Engineer: James Shih Structure Rep.: Hossein Sabbagh

Sample Information

DIME Sample ID: 2024-02-23-37

TL Number from the TL Form:

Sample Submitted By Organization: CT D07 - Plant Services

Sample Organization Contact: 562-345-3126

Type of Sample: Department Acceptance

Type of Material: Aggregate

Sample Taken Date: 02/23/2024

Date that the sample was received by the laboratory/organization performing the testing: 02/26/2024

The quantity of what the sample constitutes: 4 Bags Of Coldfeed Aggregate

A brief description of the sample: 3/4" HMA-A-SP R15

From where was the sample collected: Source

Laboratory sample identification:

Structure unique identifier:

Structure name:

The fabricator/manufacturer/facility name: Vulcan Materials (Palmdale)

Material Information

Source Identification (SMARA, name of Pit or Job Site): Various (see Notes)

The fabricator's/manufacturer's product name for the sample:

The fabricator/manufacturer designation for the sample:

The plant number:

A detailed description of where the material sample was collected: Bin Vulcan Materials-Palmdale

Where the material sample would have been placed if not sampled:

Primary Aggregate Nominal Size: 3/4 inch

The concrete mix design number:

Lot number:

Sublot number:

Aggregate Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2024-02-23-37-1

Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)

Verified Date: 03/19/2024

Date Tested: 02/26/2024

Submitted By Organization: CT D07 - Plant Services

Organization Address: 13230 East Firestone Boulevard, Suite G,

Organization City: Santa Fe Springs

Organization State: CA

Organization Zipcode: 90670

Organization Email: victor.zengler@dot.ca.gov

Organization Phone: (562) 345-3126

General Comments for this Test:

Test Result Compliance: complies

Additional Comments When Verified:

What type of gradation is being tested?	Combined Gradation
Cumulative percent passing the 2 in. sieve	100 %
Cumulative percent passing the 1 1/2 in. sieve	100 %
Cumulative percent passing the 1 in. sieve	100 %
Cumulative percent passing the 3/4 in. sieve	100 %
Cumulative percent passing the 1/2 in. sieve	87 %
Cumulative percent passing the 3/8 in. sieve	79 %
Cumulative percent passing the #4 sieve	58 %
Cumulative percent passing the #8 sieve	45 %
Cumulative percent passing the #16 sieve	23 %
Cumulative percent passing the #30 sieve	17 %
Cumulative percent passing the #50 sieve	13 %
Cumulative percent passing the #100 sieve	7 %
Cumulative percent passing the #200 sieve	3.7 %

Test 2 of 2

DIME Test ID: 2024-02-23-37-2

Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)