DEPARTMENT OF TRANSPORTATION

DIVISION OF ENGINEERING SERVICES

MATERIALS ENGINEERING AND TESTING SERVICES

Concrete Materials Testing Branch

5900 Folsom Blvd.

Sacramento, CA 95819

916-227-7205

Contract # 030L0804 Cty SAC Rte 51 PM 5.5/5.5

Vendor #

	REPORT OF LABORATORY TESTING
Resident Engineer:	Jony Tji	Date Reported:	02/15/2024
Address:		TL Number:	293954
City:
Project Name: Bridge Rail Replacement due to Vehicle Strike
Prime Contractor: RA NEMETZ
Sample Taken Date:	01/18/2024	Mix Design:	Unknown
Contractor: Unknown		Location: Marconi Bridge
Structure unique identifier:
Structure name:
Location of Pour:

The following testing has been tested in accordance with:

ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

Capped in accordance with ASTM C617/CTM521

Specimen	Average diameter of cylinder (in)	Cross sectional area of cylinder (in^2)	Maximum load on cylinder (lb)	Compressive strength of cylinder (psi)	Type of fracture pattern of cylinder
1	3.98	12.44	46567	3743.0	1
2	4.01	12.63	45011	3564.0	1
3	4.00	12.57	45196	3597	1

DIME Test ID: 2024-01-18-12-1
Number of specimens: 3
Compressive strength (to nearest 10 psi): 3630
Age of specimen: 14 days
Certified By: Spencer Adams

ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

Capped in accordance with ASTM C617/CTM521

Specimen	Average diameter of cylinder (in)	Cross sectional area of cylinder (in^2)	Maximum load on cylinder (lb)	Compressive strength of cylinder (psi)	Type of fracture pattern of cylinder
1	4.02	12.69	54334	4281.0	1
2	4.01	12.63	46740	3701.0	1
3	4.01	12.63	46391	3673	1

DIME Test ID: 2024-01-18-12-2
Number of specimens: 3
Compressive strength (to nearest 10 psi): 3890
Age of specimen: 28 days
Certified By: Spencer Adams

Summary of Items Observed and Conversations:

Comments: This report is for the purpose of reporting test results.
Should you require recommendations concerning repairs or remedial efforts please contact the METS representative,
who represents the Materials Engineering and Testing Services for your project.


*Subject to final inspection by the Resident Engineer.

TL- Report of Laboratory Testing

DEPARTMENT OF TRANSPORTATION

Summary of Items Observed and Conversations:

Comments: This report is for the purpose of reporting test results. Should you require recommendations concerning repairs or remedial efforts please contact the METS representative, who represents the Materials Engineering and Testing Services for your project.

Comments: This report is for the purpose of reporting test results.
Should you require recommendations concerning repairs or remedial efforts please contact the METS representative,
who represents the Materials Engineering and Testing Services for your project.