Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 995083 DEA: 051R1604 EFIS: 0523000152
QA Service Level: 1
DIST-CO-RTE-PM: 05-SB-101-82.18, 82.2/82.2
Work Description: Repair high-load hit
Location Description: Near Santa Maria, US101 and Clark Ave overcrossing.
Contractor Name: SOUZA CONSTRUCTION
Contractor Address: 4027 Santa Fe Road, San Luis Obispo, CA 93403
Resident Engineer: Albert Reed Structure Rep.: Alis Chhay
DIME Sample ID: 2023-12-18-18
TL Number from the TL Form:
Sample Submitted By Organization: Con-Fab California Corporation - Lathrop
Sample Organization Contact: (209) 249-4700
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 12/18/2023
Date that the sample was received by the laboratory/organization performing the testing: 12/18/2023
The quantity of what the sample constitutes: 1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
A brief description of the sample: 1 bucket of 1/2", 3/8" and Sand
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: ConFab Lathrop
Source Identification (SMARA, name of Pit or Job Site): Confab Stockpile
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile @ Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: VER-98LV
Lot number:
Sublot number:
Aggregate Mix Number:
DIME Test ID: 2023-12-18-18-1
Test Method: ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Verified Date: 12/21/2023
Date Tested: 12/19/2023
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
What type of gradation is being tested?
|
Combined Gradation
|
|
Cumulative percent passing the 2 in. sieve
|
no data0 %
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
no data0 %
|
|
Cumulative percent passing the 1 in. sieve
|
no data0 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
94.3 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
73.8 %
|
|
Cumulative percent passing the #4 sieve
|
48.5 %
|
|
Cumulative percent passing the #8 sieve
|
39 %
|
|
Cumulative percent passing the #16 sieve
|
25.8 %
|
|
Cumulative percent passing the #30 sieve
|
16.1 %
|
|
Cumulative percent passing the #50 sieve
|
8.7 %
|
|
Cumulative percent passing the #100 sieve
|
3.2 %
|
|
Cumulative percent passing the #200 sieve
|
1.7 %
|
DIME Test ID: 2023-12-18-18-2
Test Method: ASTM C117-17: Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Verified Date: 12/21/2023
Date Tested: 12/18/2023
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: Sand: 1.4%
1/2": 0.4%
3/8": 1.2%
Test Result Compliance:
Additional Comments When Verified:
|
Percent finer than No. 200 sieve
|
1.4 %
|
DIME Test ID: 2023-12-18-18-3
Test Method: ASTM D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
Verified Date: 12/21/2023
Date Tested: 12/20/2023
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
DIME Test ID: 2023-12-18-18-4
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 12/21/2023
Date Tested: 12/21/2023
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: Sand: 0.70%
Agg: 6.50%
Test Result Compliance:
Additional Comments When Verified:
|
Total evaporable moisture content
|
6.5 %
|
