Print Report | Back to Sample Detail

Sample Record for 2023-11-30-25

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214708 DEA: 07323904 EFIS: 0716000072 QA Service Level: 1
DIST-CO-RTE-PM: 07-VEN-1-21.3/28.4
Work Description: COLD PLANE AC, PLACE RUBBERIZED HOT MIX AS
Location Description: VENTURA COUNTY NEAR VENTURA FROM ROUTE 1/101 SEPARATION TO MOBIL PIER ROAD.
Contractor Name: C. A. Rasmussen, Inc.
Contractor Address: 28548 Livingston Avenue, Valencia, CA 91355
Resident Engineer: Alfred Ira Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-11-30-25
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Production Start-Up
Type of Material: Hot Mix Asphalt
Sample Taken Date: 11/30/2023
Date that the sample was received by the laboratory/organization performing the testing: 12/04/2023
The quantity of what the sample constitutes: 20 BOXES OF RHMA-G
A brief description of the sample: 1/2" RHMA-G+WMA 0.50% EVO M1
From where was the sample collected: Manufacturer
Laboratory sample identification: 0594G-23
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: VULCAN-SATICOY

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number: 326122 SAT VLO
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2023-11-30-25-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 12/19/2023
Date Tested: 12/05/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of Samples 1
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7329.7 grams
Mass of oven-dry sample in air for Sample 1 1563.4 grams
Mass of container filled with the sample and water for Sample 1 8242.7 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.404
Theoretical maximum density at 25°C (77°F) 2397 kg/m^3

Test 2 of 4

DIME Test ID: 2023-11-30-25-2
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 12/19/2023
Date Tested: 12/06/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Percent Air Voids 3.8 %
Percent Air Voids 2 3.9 %
Percent Air Voids 3 4.0 %
Percent Air Voids Average 3.9 %

Test 3 of 4

DIME Test ID: 2023-11-30-25-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 12/19/2023
Date Tested: 12/06/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Bulk Specific Gravity 2.312
Bulk Specific Gravity 2 2.310
Bulk Specific Gravity 3 2.309
Average Bulk Specific Gravity 2.31

Test 4 of 4

DIME Test ID: 2023-11-30-25-4
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 12/19/2023
Date Tested: 12/05/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 1679.0 g
Corrected Asphalt Binder Content 7.60 %
Mass Loss 131.3 g
Correction Factor (Percent by mass of HMA Specimen) 0.06 %
Moisture Content 0.00 %
Temperature Compensation Factor 0.16 %
Test Temperature 538 C