Print Report | Back to Sample Detail

Sample Record for 2023-11-30-24

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214708 DEA: 07323904 EFIS: 0716000072 QA Service Level: 1
DIST-CO-RTE-PM: 07---
Work Description: COLD PLANE AC, PLACE RUBBERIZED HOT MIX AS
Location Description: VENTURA COUNTY NEAR VENTURA FROM ROUTE 1/101 SEPARATION TO MOBIL PIER ROAD.
Contractor Name: C. A. Rasmussen, Inc.
Contractor Address: 28548 Livingston Avenue, Valencia, CA 91355
Resident Engineer: Alfred Ira Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-11-30-24
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 11/30/2023
Date that the sample was received by the laboratory/organization performing the testing: 12/04/2023
The quantity of what the sample constitutes: 4 bags of comb agg., 1 bag each of CRM Scrap and Hi-Nat
A brief description of the sample: PSUE 1/2" RHMA-G + WMA 0.50% EVO M1
From where was the sample collected: Manufacturer
Laboratory sample identification: 0594G-23
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Saticoy/ Fish Canyon IRW/ Valero/ Ingevity/ Evotherm

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-19-0035, 91-19-0020
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Vulcan Saticoy
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: 326122 SAT VLO
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2023-11-30-24-1CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates12/04/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-11-30-24-2CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates12/04/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-11-30-24-3AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)12/04/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-11-30-24-4AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)12/04/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-11-30-24-5AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)12/04/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-11-30-24-6AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)12/04/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-11-30-24-7AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)12/04/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-11-30-24-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)12/04/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-11-30-24-9AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)12/04/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-11-30-24-10AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)12/04/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory