Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 995100 DEA: 030L2604 EFIS: 0324000072
QA Service Level: 1
DIST-CO-RTE-PM: 03---
Work Description:
Location Description:
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 1900 Glendale Ave, Sparks, NV 89431
Resident Engineer: Amir Zamanian Structure Rep.: Unknown
DIME Sample ID: 2023-11-08-73
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 11/08/2023
Date that the sample was received by the laboratory/organization performing the testing: 11/09/2023
The quantity of what the sample constitutes: 1 Tanker & 17 Totes
A brief description of the sample: 1 gallon can / 9800 RESIN
From where was the sample collected: Source
Laboratory sample identification: 000033KBP
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia
DIME Test ID: 2023-11-08-73-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 03/19/2024
Date Tested: 12/07/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
DIME Test ID: 2023-11-08-73-2
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 03/19/2024
Date Tested: 12/07/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Density Units
|
pounds/gallons
|
Liquid Density (pounds per gallon)
|
9
|
DIME Test ID: 2023-11-08-73-3
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 03/19/2024
Date Tested: 11/14/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted based on vendor's results
Test Result Compliance: complies
Additional Comments When Verified:
Number of specimens tested
|
6
|
Conditioning procedure
|
18/25/50+5/70
|
Speed of testing
|
0.45 in/min
|
Sample 1 Width
|
0.488 in
|
Sample 1 Ultimate strength
|
8900 psi
|
Sample 1 Thickness
|
0.246 in
|
Sample 1 Area
|
0.12 in^2
|
Sample 1 Ultimate Strength Actual
|
1068 lbs
|
Sample 1 percent elongation
|
26 %
|
Sample 1 Time
|
0 MM:SS
|
Sample 2 Width
|
0.489 in
|
Sample 2 Thickness
|
0.245 in
|
Sample 2 Area
|
0.1198 in^2
|
Sample 2 Ultimate strength
|
8923.2 psi
|
Sample 2 Ultimate Strength Actual
|
1069 lbs
|
Sample 2 percent elongation
|
13.6 %
|
Sample 2 Time
|
0 MM:SS
|
Sample 3 Width
|
0.49 in
|
Sample 3 Thickness
|
0.244 in
|
Sample 3 Area
|
0.1196 in^2
|
Sample 3 Ultimate strength
|
8854.5 psi
|
Sample 3 Ultimate Strength Actual
|
1059 lbs
|
Sample 3 percent elongation
|
14.4 %
|
Sample 3 Time
|
0 MM:SS
|
Sample 4 Width
|
0.489 in
|
Sample 4 Thickness
|
0.25 in
|
Sample 4 Area
|
0.1223 in^2
|
Sample 4 Ultimate strength
|
8749 psi
|
Sample 4 Ultimate Strength Actual
|
1070 lbs
|
Sample 4 percent elongation
|
15.5 %
|
Sample 4 Time
|
0 MM:SS
|
Sample 5 Width
|
0.489 in
|
Sample 5 Thickness
|
0.244 in
|
Sample 5 Area
|
0.1193 in^2
|
Sample 5 Ultimate strength
|
8801.3 psi
|
Sample 5 Ultimate Strength Actual
|
1050 lbs
|
Sample 5 percent elongation
|
16.9 %
|
Sample 5 Time
|
0 MM:SS
|
Sample 6 Width
|
0.489 in
|
Sample 6 Thickness
|
0.242 in
|
Sample 6 Area
|
0.1183 in^2
|
Sample 6 Ultimate strength
|
8833.5 psi
|
Sample 6 Ultimate Strength Actual
|
1045 lbs
|
Sample 6 percent elongation
|
18.7 %
|
Sample 6 Time
|
0 MM:SS
|
Ultimate Strength Average
|
8844 psi
|
Percent Elongation Average
|
18 %
|
DIME Test ID: 2023-11-08-73-4
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 03/19/2024
Date Tested: 12/07/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Mean of two volatile content determination
|
44.4
|
DIME Test ID: 2023-11-08-73-5
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 03/19/2024
Date Tested: 11/16/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted based on vendor's results
Test Result Compliance: complies
Additional Comments When Verified:
Curing history for Sample 1
|
24hr
|
Maximum applied load (P) for Sample 1
|
1440 lb
|
Span length for Sample 1
|
9 in
|
Break location for Sample 1
|
bond
|
Specimen defects/notes for Sample 1
|
no data
|
Surface type for Sample 1
|
SSD
|
Modulus of rupture (R) for Sample 1
|
720 psi
|
Curing history for Sample 2
|
24hr
|
Maximum applied load (P) for Sample 2
|
1398 lb
|
Span length for Sample 2
|
9 in
|
Break location for Sample 2
|
bond
|
Specimen defects/notes for Sample 2
|
no data
|
Surface type for Sample 2
|
SSD
|
Modulus of rupture (R) for Sample 2
|
699 psi
|
Curing history for Sample 3
|
24hr
|
Maximum applied load (P) for Sample 3
|
1330 lb
|
Span length for Sample 3
|
9 in
|
Break location for Sample 3
|
bond
|
Specimen defects/notes for Sample 3
|
no data
|
Surface type for Sample 3
|
SSD
|
Modulus of rupture (R) for Sample 3
|
665 psi
|
DIME Test ID: 2023-11-08-73-6
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 03/19/2024
Date Tested: 11/14/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted based on vendor's results
Test Result Compliance: complies
Additional Comments When Verified:
Diameter of lid
|
153.9 mm
|
Room Temperature
|
78 f
|
Tare weight
|
no data
|
Initial weight
|
100.162 grams
|
Weight at 5 minutes
|
100.064 grams
|
Weight at 10 minutes
|
99.98 grams
|
Weight at 15 minutes
|
99.912 grams
|
Weight at 20 minutes
|
99.848 grams
|
Weight at 25 minutes
|
99.78 grams
|
Weight at 30 minutes
|
99.7 grams
|
Final weight
|
99.7 grams
|
Total weight loss
|
0.46 grams
|
Calculated radius of gallon can lid in cm
|
7.695 cm
|
Lid Factor
|
53.757 m^2
|
Volatile emission
|
24.836 grams/m^2
|