Print Report | Back to Sample Detail

Sample Record for 2023-10-09-57

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994590 DEA: 081H8504 EFIS: 0817000142 QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV,SBD-15,60-50.6/52.3,R0.0/R2.1,R9.2/R9.5
Work Description: MINOR CONC, ROCK BLANKET, AB, AND MGS.
Location Description: RIVERSIDE AND SAN BERNARDINO COUNTIES ON ROUTE 15 FROM 0.5 MILE NORTH OF CANTU-GALLEANO RANCH ROAD TO SAN BERNARDINO COUNTY LINE AND ON ROUTE 60 FROM 0.3 MILE EAST OF HAVEN AVENUE TO 0.3 MILE WEST OF MIRA LOMA OVERHEAD
Contractor Name: DIVERSCAPE, INC. DBA DIVERSIFIED LANDSCAPE CO.
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-10-09-57
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 10/09/2023
Date that the sample was received by the laboratory/organization performing the testing: 11/01/2023
The quantity of what the sample constitutes: 5 Bags Of Agg., 3 Bags Of Rap
A brief description of the sample: JMF 3/4" WMA-A-SP R25 0.4% EVO
From where was the sample collected: Manufacturer
Laboratory sample identification: 0559A-23
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan -Corona

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-33-0027
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Belt Cut at Vulcan -Corona
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: 221528W CORD SJR
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2023-10-09-57-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)11/01/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-09-57-2AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)11/01/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-09-57-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)11/01/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-09-57-4AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)11/01/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-09-57-5AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)11/01/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-09-57-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)11/01/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-09-57-7AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)11/01/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-09-57-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)11/01/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-09-57-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates11/01/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-09-57-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates11/01/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory