Print Report | Back to Sample Detail

Sample Record for 2023-10-19-30

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994685 DEA: 043Q6104 EFIS: 0419000229 QA Service Level: 1
DIST-CO-RTE-PM: 04-SCL-17,85,87,101-Var
Work Description: POLYESTER CONCRETE OVERLAY, AND STRUCTURAL CONCRETE APPROACH SLAB.
Location Description: SANTA CLARA COUNTY AT VARIOUS LOCATIONS
Contractor Name: TRUESDELL CORPORATION OF CALIFORNIA, INC
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-10-19-30
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 10/19/2023
Date that the sample was received by the laboratory/organization performing the testing: 10/20/2023
The quantity of what the sample constitutes: 2 tankers
A brief description of the sample: 1 gallon / PPC 1121
From where was the sample collected: Source
Laboratory sample identification: 000027KBP
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia

Material Information

Mfg. Lot Number(s): AZ3J00068
Batch number: AZ3J00068
Mix number: AZ3J00068
Test results on following page(s): 6

Test Results

Test 1 of 6

DIME Test ID: 2023-10-19-30-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 03/22/2024
Date Tested: 11/13/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity 114

Test 2 of 6

DIME Test ID: 2023-10-19-30-2
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 03/22/2024
Date Tested: 11/13/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Density Units pounds/gallons
Liquid Density (pounds per gallon) 9

Test 3 of 6

DIME Test ID: 2023-10-19-30-3
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 03/22/2024
Date Tested: 10/25/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted Vendors Results
Test Result Compliance: complies
Additional Comments When Verified:
Number of specimens tested 6
Conditioning procedure 18/25/50+5/70
Speed of testing 0.45 in/min
Sample 1 Width 0.486 in
Sample 1 Ultimate strength 3263 psi
Sample 1 Thickness 0.249 in
Sample 1 Area 0.121 in^2
Sample 1 Ultimate Strength Actual 394.823 lbs
Sample 1 percent elongation 73.1 %
Sample 1 Time no data0 MM:SS
Sample 2 Width 0.486 in
Sample 2 Thickness 0.252 in
Sample 2 Area 0.1225 in^2
Sample 2 Ultimate strength 3203 psi
Sample 2 Ultimate Strength Actual 392.37 lbs
Sample 2 percent elongation 71.6 %
Sample 2 Time no data0 MM:SS
Sample 3 Width 0.486 in
Sample 3 Thickness 0.247 in
Sample 3 Area 0.12 in^2
Sample 3 Ultimate strength 3289 psi
Sample 3 Ultimate Strength Actual 394.68 lbs
Sample 3 percent elongation 73.2 %
Sample 3 Time no data0 MM:SS
Sample 4 Width 0.486 in
Sample 4 Thickness 0.249 in
Sample 4 Area 0.121 in^2
Sample 4 Ultimate strength 3269 psi
Sample 4 Ultimate Strength Actual 395.55 lbs
Sample 4 percent elongation 73.1 %
Sample 4 Time no data0 MM:SS
Sample 5 Width 0.486 in
Sample 5 Thickness 0.254 in
Sample 5 Area 0.1234 in^2
Sample 5 Ultimate strength 3124 psi
Sample 5 Ultimate Strength Actual 385.5 lbs
Sample 5 percent elongation 69 %
Sample 5 Time no data0 MM:SS
Sample 6 Width 0.487 in
Sample 6 Thickness 0.244 in
Sample 6 Area 0.1188 in^2
Sample 6 Ultimate strength 3122 psi
Sample 6 Ultimate Strength Actual 370.899 lbs
Sample 6 percent elongation 68.3 %
Sample 6 Time no data0 MM:SS
Ultimate Strength Average 3212 psi
Percent Elongation Average 71 %

Test 4 of 6

DIME Test ID: 2023-10-19-30-4
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 03/22/2024
Date Tested: 11/13/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Mean of two volatile content determination 46

Test 5 of 6

DIME Test ID: 2023-10-19-30-5
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 03/22/2024
Date Tested: 10/27/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted Vendors Results
Test Result Compliance: complies
Additional Comments When Verified:
Curing history for Sample 1 24hr
Maximum applied load (P) for Sample 1 1137.75 lb
Span length for Sample 1 9 in
Break location for Sample 1 bond
Specimen defects/notes for Sample 1 no data
Surface type for Sample 1 SSD
Modulus of rupture (R) for Sample 1 568.875 psi
Curing history for Sample 2 24hr
Maximum applied load (P) for Sample 2 1446.56 lb
Span length for Sample 2 9 in
Break location for Sample 2 bond
Specimen defects/notes for Sample 2 no data
Surface type for Sample 2 SSD
Modulus of rupture (R) for Sample 2 723.28 psi
Curing history for Sample 3 24hr
Maximum applied load (P) for Sample 3 1266.54 lb
Span length for Sample 3 9 in
Break location for Sample 3 bond
Specimen defects/notes for Sample 3 no data
Surface type for Sample 3 SSD
Modulus of rupture (R) for Sample 3 633.27 psi

Test 6 of 6

DIME Test ID: 2023-10-19-30-6
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 03/22/2024
Date Tested: 10/25/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted Vendors Results
Test Result Compliance: complies
Additional Comments When Verified:
Diameter of lid 153.9 mm
Room Temperature 77 f
Tare weight no data
Initial weight 100.267 grams
Weight at 5 minutes 100.166 grams
Weight at 10 minutes 100.073 grams
Weight at 15 minutes 99.955 grams
Weight at 20 minutes 99.853 grams
Weight at 25 minutes 99.745 grams
Weight at 30 minutes 99.657 grams
Final weight 99.66 grams
Total weight loss 0.61 grams
Calculated radius of gallon can lid in cm 7.695 cm
Lid Factor 53.757 m^2
Volatile emission 32.63 grams/m^2