Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 214486 DEA: 080K1224 EFIS: 0815000244
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-15-R28.6/37.5
Work Description: REHBILIATATE EXISTING MAINLINE AND RAMP PAVEMENT
Location Description: SAN BERNARDINO COUNTY IN HESPERIA AND VICTORVILLE FROM OAK HILL ROAD OVERCROSSING TO 0.1 MILE SOUTH OF BEAR VALLEY ROAD OVERCROSSING
Contractor Name: SULLY - MILLER CONTRACTING COMPANY
Contractor Address: 135 S STATE COLLEGE BLVD. 400, BREA, CA 92821
Resident Engineer: Larry J Canuti Structure Rep.: Taghreed Al-khateeb
DIME Sample ID: 2023-10-11-42
TL Number from the TL Form: 1042-1011
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Quality Assurance
Type of Material: Concrete
Sample Taken Date: 10/11/2023
Date that the sample was received by the laboratory/organization performing the testing: 10/12/2023
The quantity of what the sample constitutes: 6
A brief description of the sample: 6X12
From where was the sample collected: Job Site
Laboratory sample identification: 1042-1011
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SULLY Miller
The concrete mix design number: G3-22-PCC-272
The truck number from where the sample was collected: Not Provided on TL
The batch plant ticket number from where the sample was collected: 27
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: NI I15 Stage 2A SB I15 Landes 4 at station 209.51-209.09
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:
DIME Test ID: 2023-10-11-42-1
Test Method: ASTM C39-21: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Verified Date: 02/08/2024
Date Tested: 11/22/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Unit system used?
|
US Units
|
|
Number of specimens
|
3
|
|
Test performed
|
With no density determined
|
|
Apparent mass of submerged cylinder 1
|
0 lb
|
|
Average diameter of cylinder 1
|
5.98 in
|
|
Average diameter of cylinder 2
|
5.99 in
|
|
Average diameter of cylinder 3
|
5.98 in
|
|
Cross sectional area of cylinder 1
|
28.09 in^2
|
|
Cross sectional area of cylinder 2
|
28.18 in^2
|
|
Cross sectional area of cylinder 3
|
28.09 in^2
|
|
Compressive strength (to nearest 10 psi)
|
6210 psi
|
|
Maximum load on cylinder 1
|
174135 lb
|
|
Maximum load on cylinder 2
|
177410 lb
|
|
Maximum load on cylinder 3
|
172130 lb
|
|
Compressive strength of cylinder 1
|
6200.0 psi
|
|
Type of fracture pattern of cylinder 1
|
3
|
|
Compressive strength of cylinder 2
|
6300.0 psi
|
|
Compressive strength of cylinder 3
|
6130 psi
|
|
Type of fracture pattern of cylinder 2
|
3
|
|
Type of fracture pattern of cylinder 3
|
3
|
|
Comment on any defect in either specimen or caps (Max 250 Characters)
|
no data
|
|
Correction factor for cylinder 1
|
1.00
|
|
Correction factor for cylinder 2
|
1.00
|
|
Correction factor for cylinder 3
|
1.00
|
|
Age of specimen
|
42 days
|
|
Age of specimen in hours
|
0 hours
|
|
Serial number of delivery ticket, if available
|
no data
|
