Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994144 DEA: 060W15V4 EFIS: 0619000107
QA Service Level: 1
DIST-CO-RTE-PM: 06-KER-58,204-R53.4/R54.5,R0.0/4.6
Work Description: MODIFY SIGNAL AND LIGHTING SYSTEMS AND REPLACE CURB RAMPS.
Location Description: KERN COUNTY IN BAKERSFIELD ON ROUTE 58 FROM SOUTH H STREET OVERCROSSING TO ROUTE 204 AND ON ROUTE 204 FROM ROUTE 58/204 SEPARATION TO L STREET
Contractor Name: PTM General Engineering
Contractor Address: 5942 Acorn Street, Riverside,CA 92504
Resident Engineer: Trever Shiplee Structure Rep.: Ulysis Baal
DIME Sample ID: 2023-09-13-7
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Sample Organization Contact: 661-549-8281
Type of Sample: Department Acceptance
Type of Material: Soil
Sample Taken Date: 09/13/2023
Date that the sample was received by the laboratory/organization performing the testing: 09/13/2023
The quantity of what the sample constitutes: 40 lbs native material
A brief description of the sample: Brown, sandy-silt, some clay and gravel
From where was the sample collected: Job Site
Laboratory sample identification: 70
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: none
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: Test holes at jobsite
Where the material sample would have been placed if not sampled:
DIME Test ID: 2023-09-13-7-1
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Verified Date: 09/14/2023
Date Tested: 09/13/2023
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test: Ramp Area # 42 curb and gutter @ union ave and Alpine st PM 3.20 elevation: FSG width: 2.5' length: 50 ft probe: 8" 95% required
Test Result Compliance: complies
Additional Comments When Verified:
Standard Count Density
|
1586 g/cc
|
Count or Density 1
|
847 g/cc
|
Count or Density 2
|
892 g/cc
|
Count or Density 3
|
860 g/cc
|
Standard Count Moisture
|
615 g/cc
|
Moisture Count 1
|
125 g/cc
|
Moisture Count 2
|
115 g/cc
|
Moisture Count 3
|
116 g/cc
|
Sum of Count or Density
|
2599.00 g/cc
|
Average of Count or Density
|
866.00 g/cc
|
Sum of Moisture Count
|
356.00 g/cc
|
Average of Moisture Count
|
119.00 g/cc
|
Count Ratio Density
|
0.55
|
Count Ratio Moisture
|
0.19
|
Calculated Percent Relative Compaction
|
96.3 %
|
Reported Percent Relative Compaction
|
96 %
|
DIME Test ID: 2023-09-13-7-2
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 09/14/2023
Date Tested: 09/13/2023
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test: Ramp Area # 42 curb and gutter @ union ave and Alpine st PM 3.20 elevation: FSG width: 2.5' length: 50 ft probe: 8" 95% required
Test Result Compliance: complies
Additional Comments When Verified:
Is oversize material
|
No
|
In-place wet density
|
2.09
|
Highest adjust wet density
|
2.17
|
Relative compaction
|
96
|
% Moisture
|
7.7 %
|
Optimum Moisture
|
9.7 %
|