Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994745 DEA: 040Y2304 EFIS: 0422000258
QA Service Level: 1
DIST-CO-RTE-PM: 04-NAP-29-0.0/5.1
Work Description: Cold plane AC pavement and place HMA (A).
Location Description: CONSTRUCTION ON STATE HIGHWAY IN NAPA COUNTY IN AND NEAR AMERICAN CANYON FROM SOLANO COUNTY LINE TO 0.4 MILE NORTH OF AIRPORT BOULEVARD.
Contractor Name: Ghilotti Bros, Inc. (JR Ramirez, Kaely Verdu, Joe Palesi)
Contractor Address: 525 Jacoby Street, San Rafael, CA 94901
Resident Engineer: Paramdeep Brar Structure Rep.: Unknown
DIME Sample ID: 2023-07-18-80
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/18/2023
Date that the sample was received by the laboratory/organization performing the testing: 07/20/2023
The quantity of what the sample constitutes: LOT 1 SUBLOT 2
A brief description of the sample: 3/4-INCH HMA Types A and B
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Lake Herman Batch Plant
DIME Test ID: 2023-07-18-80-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 09/12/2023
Date Tested: 07/20/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test: LOT 1 SUBLOT 2
Vulcan Lake Herman Batch Plant
Test Result Compliance: complies
Additional Comments When Verified:
Number of tests
|
2
|
What is the unit of measurement for theoretical density?
|
SI Units
|
Mass Determination
|
Air
|
Specific Gravity for Sample 1
|
2.513
|
Specific Gravity for Sample 2
|
2.513
|
Average Specific Gravity
|
2.513
|
Theoretical maximum density at 25°C (77°F)
|
2.5 kg/m^3
|