Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994612 DEA: 112N1414 EFIS: 1121000253
QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-15,78-Various
Work Description: PLACE METHACRYLATE, POLYESTER CONCRETE, JOINT SEALS AND REPAIR SPALLS.
Location Description: SAN DIEGO COUNTY AT VARIOUS LOCATIONS
Contractor Name: TRUESDELL CORPORATION OF CALIFORNIA
Contractor Address: 1310 W 23RD ST, TEMPE AZ 85282
Resident Engineer: Benjamin Haney Structure Rep.: Unknown
DIME Sample ID: 2023-08-18-71
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Methacrylate
Sample Taken Date: 08/18/2023
Date that the sample was received by the laboratory/organization performing the testing: 08/18/2023
The quantity of what the sample constitutes: 100 Totes
A brief description of the sample: 2 pints 204/CHP/8020
From where was the sample collected: Source
Laboratory sample identification: 000001
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia
DIME Test ID: 2023-08-18-71-1
Test Method: CONCLP 4-16: HMWM
Verified Date: 10/02/2023
Date Tested: 09/28/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: CA551 and tack free time accepted based on vendor's results
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity (ASTM D 2196) Brookfield RVT with UL adapter, 50 RPM @ 77 deg F, 25 max cps @ 77 deg F
|
19.7
|
Specific gravity (ASTM D 1475) 0.90 min @ 77 deg F
|
9
|
Volatile content (ASTM D 2369) 30% max
|
11.1
|
Flash point (ASTM D 3828) more than 180 deg F
|
190
|
PCC - SSD bond strength (CA Test 551) 500 psi minimum @ 24 hours
|
910.484
|
Tack free time, 400 minutes max
|
329
|