Print Report | Back to Sample Detail

Sample Record for 2023-07-25-77

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994936 DEA: 051P1604 EFIS: 0521000179 QA Service Level: 1
DIST-CO-RTE-PM: 05---
Work Description:
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-07-25-77
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Dispute Resolution
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/25/2023
Date that the sample was received by the laboratory/organization performing the testing: 08/11/2023
The quantity of what the sample constitutes: 5 Boxes RHMA, 2 Cans of Binder, 2 bags of aggregate
A brief description of the sample: 3/4 RHMA-G
From where was the sample collected: Source
Laboratory sample identification: 023-047
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SPM-Templeton

Material Information

HMA Type: RHMA-G
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 1
HMA Mix Number:
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 5

Test Results

Test 1 of 5

DIME Test ID: 2023-07-25-77-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/17/2023
Date Tested: 08/17/2023
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of Samples 2
What is the unit of measurement for theoretical density? SI Units
Mass Determination Water
Method Performed no data
Mass of oven-dry sample in air for Sample 1 2594.2 grams
Mass of container submerged in water for Sample 1 1345 grams
Mass of the sample and container in water for Sample 1 2831.8 grams
Mass of oven-dry sample in air for Sample 2 2582.1 grams
Mass of container submerged in water for Sample 2 1345 grams
Mass of the sample and container in water for Sample 2 2831.3 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.343
Specific Gravity for Sample 2 2.356
Average Specific Gravity 2.35
Theoretical maximum density at 25°C (77°F) 2343 kg/m^3

Test 2 of 5

DIME Test ID: 2023-07-25-77-2
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 08/17/2023
Date Tested: 08/17/2023
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Percent Air Voids 2 %
Percent Air Voids 2 2.2 %
Percent Air Voids 3 2.3 %
Average Percent Air Voids 2.2 %

Test 3 of 5

DIME Test ID: 2023-07-25-77-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/17/2023
Date Tested: 08/16/2023
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity 2.304
Bulk Specific Gravity 2 2.298
Bulk Specific Gravity 3 2.295
Average Bulk Specific Gravity 2.299

Test 4 of 5

DIME Test ID: 2023-07-25-77-4
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/24/2023
Date Tested: 08/23/2023
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 4218.1 g
Mass of the specimen and specimen basket assembly prior to ignition 6463.6 g
Mass of HMA Sample prior to ignition 2245.5 g
Corrected Asphalt Binder Content 7.33 %
Mass Loss 188.9 g
Mass of aggregate remaining after ignition 2056.6 g
Correction Factor (Percent by mass of HMA Specimen) 0.92 %
Moisture Content no data0 %
Temperature Compensation Factor 0.16 %
Test Temperature 538 C

Test 5 of 5

DIME Test ID: 2023-07-25-77-5
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/17/2023
Date Tested: 08/16/2023
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of tests 2
What is the unit of measurement for theoretical density? SI Units
Mass Determination Water
Method Performed Mechanical Agitation - Method A
Mass of oven-dry sample in air for Sample 1 2594.2 grams
Mass of sample in water for Sample 1 1486.8 grams
Mass of oven-dry sample in air for Sample 2 2582.1 grams
Mass of sample in water for Sample 2 1486.3 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.343
Specific Gravity for Sample 2 2.356
Average Specific Gravity 2.35
Theoretical maximum density at 25°C (77°F) 2343.2 kg/m^3