Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994561 DEA: 032G8604 EFIS: 0322000250
QA Service Level: 1
DIST-CO-RTE-PM: 03-PLA-80-R19.0/24.5
Work Description: RHMA, COLD PLANE AC PVMT, & MODIFYING TRAFFIC MONITORING STATIONS.
Location Description: PLACER COUNTY 0.6 MILE EAST OF AUBURN FROM 0.1 MILE EAST OF RUSSELL ROAD OVERCROSSING TO 1.1 MILES EAST OF PLACER HILLS OVERCROSSING
Contractor Name: GEORGE REED, INC.
Contractor Address: 2520 Warren Dr Rocklin CA 95677
Resident Engineer: Justing Kunert Structure Rep.: Unknown
DIME Sample ID: 2023-07-16-7
TL Number from the TL Form: 675610
Sample Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Sample Organization Contact: (530) 741-4238
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/16/2023
Date that the sample was received by the laboratory/organization performing the testing: 07/17/2023
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 1/2 RHMA-O
From where was the sample collected: Source
Laboratory sample identification: 23-090
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: George Reed - Rio Linda
DIME Test ID: 2023-07-16-7-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/04/2023
Date Tested: 07/18/2023
Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Organization Address: 5330 Arboga Road,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of the specimen basket assembly
|
4039.4 g
|
|
Mass of the specimen and specimen basket assembly prior to ignition
|
6152.5 g
|
|
Mass of HMA Sample prior to ignition
|
2113.1 g
|
|
Corrected Asphalt Binder Content
|
7.99 %
|
|
Mass Loss
|
173 g
|
|
Mass of aggregate remaining after ignition
|
1940.1 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.2 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
no data0 %
|
|
Test Temperature
|
538 C
|