Print Report | Back to Sample Detail

Sample Record for 2023-07-24-18

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214451 DEA: 07303704 EFIS: 0714000035 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-101-8.0/27.3
Work Description: REPLACE CONCRETE BARRIERS.
Location Description: THE CITY AND COUNTY OF LOS ANGELES FROM PILGRIMAGE OVERCROSSING TO VALLEY CIRCLE BOULEVARD OVERCROSSING
Contractor Name: OHL USA
Contractor Address: 1920 Main Street, Suite 310, Irvine, California 92614
Resident Engineer: Kevin Bui Structure Rep.: Kwangsuk Suh

Sample Information

DIME Sample ID: 2023-07-24-18
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Production Start-Up
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/24/2023
Date that the sample was received by the laboratory/organization performing the testing: 07/25/2023
The quantity of what the sample constitutes: 16 BOXES OF HMA
A brief description of the sample: 3/4" HMA-A-SP R15 NO LAS
From where was the sample collected: Manufacturer
Laboratory sample identification: 0385A-23
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: AAA-Irwindale

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number: 105793
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2023-07-24-18-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/10/2023
Date Tested: 08/01/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 2158.5 g
Corrected Asphalt Binder Content 4.14 %
Mass Loss 102 g
Correction Factor (Percent by mass of HMA Specimen) 0.45 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 C

Test 2 of 4

DIME Test ID: 2023-07-24-18-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/10/2023
Date Tested: 07/27/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 7353.1 grams
Mass of oven-dry sample in air for Sample 1 2558.2 grams
Mass of container filled with the sample and water for Sample 1 8908.8 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.552
Theoretical maximum density at 25°C (77°F) 2544.6 kg/m^3

Test 3 of 4

DIME Test ID: 2023-07-24-18-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/10/2023
Date Tested: 07/27/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Bulk Specific Gravity 2.417
Bulk Specific Gravity 2 2.427
Bulk Specific Gravity 3 2.416
Average Bulk Specific Gravity 2.42

Test 4 of 4

DIME Test ID: 2023-07-24-18-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 08/10/2023
Date Tested: 07/27/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Percent Air Voids 5.3 %
Percent Air Voids 2 4.9 %
Percent Air Voids 3 5.3 %
Average Percent Air Voids 5.2 %