Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994749 DEA: 120T6504 EFIS: 1222000075
QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-57-11.5/18.6
Work Description: Cold plane AC Pavement and place RHMA.
Location Description: FOR CONSTRUCTION ON STATE HIGHWAY IN ORANGE COUNTY IN ORANGE, ANAHEIM, PLACENTIA, AND FULLERTON FROM 0.2 MILE SOUTH OF ORANGEWOOD AVENUE UNDERCROSSING TO 0.3 MILE NORTH OF YORBA LINDA BOULEVARD OVERCROSSING AT VARIOUS LOCATIONS
Contractor Name: RJ Noble Company
Contractor Address: 15505 E. Lincoln Ave, Orange, CA 92865
Resident Engineer: Mona Shahidi Structure Rep.: Unknown
DIME Sample ID: 2023-06-30-15
TL Number from the TL Form:
Sample Submitted By Organization: CT D12 - Huntington Beach Field Laboratory
Sample Organization Contact: 9492798846
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/30/2023
Date that the sample was received by the laboratory/organization performing the testing: 06/30/2023
The quantity of what the sample constitutes: RHMAG, AGG
A brief description of the sample: 1/2 RHMAG
From where was the sample collected: Manufacturer
Laboratory sample identification: 23-0613
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: RJ Noble Orange
DIME Test ID: 2023-06-30-15-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 07/03/2023
Date Tested: 07/03/2023
Submitted By Organization: CT D12 - Huntington Beach Field Laboratory
Organization Address: 19601 Beach Boulevard,
Organization City: Huntington Beach
Organization State: CA
Organization Zipcode: 92648
Organization Email: frank.mai@dot.ca.gov
Organization Phone: (949) 279-8846
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used?
|
Celsius
|
Test procedure used?
|
Method A
|
Mass of the specimen basket assembly
|
3956.1 g
|
Mass of the specimen and specimen basket assembly prior to ignition
|
5598.3 g
|
Mass of HMA Sample prior to ignition
|
1642.2 g
|
Corrected Asphalt Binder Content
|
7.27 %
|
Mass Loss
|
119.7 g
|
Mass of aggregate remaining after ignition
|
1522.5 g
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.02 %
|
Moisture Content
|
0.00 %
|
Temperature Compensation Factor
|
0.00 %
|
Test Temperature
|
538 C
|
DIME Test ID: 2023-06-30-15-2
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 07/03/2023
Date Tested: 07/03/2023
Submitted By Organization: CT D12 - Huntington Beach Field Laboratory
Organization Address: 19601 Beach Boulevard,
Organization City: Huntington Beach
Organization State: CA
Organization Zipcode: 92648
Organization Email: frank.mai@dot.ca.gov
Organization Phone: (949) 279-8846
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of Samples
|
1
|
What is the unit of measurement for theoretical density?
|
US Units
|
Mass Determination
|
Air
|
Method Performed
|
Mechanical Agitation - Method A
|
Mass of container filled with water 1
|
7309.2 grams
|
Mass of oven-dry sample in air for Sample 1
|
1541.7 grams
|
Mass of container filled with the sample and water for Sample 1
|
8216.7 grams
|
Temperature of Water
|
77 °F
|
Specific Gravity for Sample 1
|
2.431
|
Theoretical maximum density at 25°C (77°F)
|
151.3 lb/ft^3
|
DIME Test ID: 2023-06-30-15-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 07/28/2023
Date Tested: 07/27/2023
Submitted By Organization: CT D12 - Huntington Beach Field Laboratory
Organization Address: 19601 Beach Boulevard,
Organization City: Huntington Beach
Organization State: CA
Organization Zipcode: 92648
Organization Email: frank.mai@dot.ca.gov
Organization Phone: (949) 279-8846
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity
|
2.272
|