Print Report | Back to Sample Detail

Sample Record for 2023-06-30-11

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993582 DEA: 081L8404 EFIS: 0820000169 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-138-R15.3/r17.1
Work Description: INSTALL GROUND-IN CENTERLINE AND SHOULDER RUMBLE STRIP
Location Description:
Contractor Name: Autoban Construction, Inc
Contractor Address: 933 N Batavia St, Orange, CA 92867
Resident Engineer: Mauricio Santa Cruz Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-06-30-11
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/30/2023
Date that the sample was received by the laboratory/organization performing the testing: 07/03/2023
The quantity of what the sample constitutes: 2 boxes of HMA 57.92 tons out
A brief description of the sample: 3/4" HMA-A-SP R15 0.50% LAS
From where was the sample collected: Manufacturer
Laboratory sample identification: 0350A-23
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Corona

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number: 224112 CORD SJR
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2023-06-30-11-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 07/14/2023
Date Tested: 07/05/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 2147.1 g
Corrected Asphalt Binder Content 4.65 %
Mass Loss 108.5 g
Correction Factor (Percent by mass of HMA Specimen) 0.26 %
Moisture Content no data0 %
Temperature Compensation Factor 0.14 %
Test Temperature 538 C