Print Report | Back to Sample Detail

Sample Record for 2023-06-05-58

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994514 DEA: 043Y0504 EFIS: 0423000192 QA Service Level: 1
DIST-CO-RTE-PM: 04-SOL-12112113-var/var
Work Description: PAVEMENT REPAIR
Location Description:
Contractor Name: OC Jones
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-06-05-58
TL Number from the TL Form: C726056
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/05/2023
Date that the sample was received by the laboratory/organization performing the testing: 06/07/2023
The quantity of what the sample constitutes: 2 boxes
A brief description of the sample: 3/4" HMA Hot Mix
From where was the sample collected: Manufacturer
Laboratory sample identification: Con_23_ 723
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Bradshaw Plant

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number: 1635V
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2023-06-05-58-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 06/29/2023
Date Tested: 06/05/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of Samples 1
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7371.5 grams
Mass of oven-dry sample in air for Sample 1 2583.7 grams
Mass of container filled with the sample and water for Sample 1 8951.9 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.575
Theoretical maximum density at 25°C (77°F) 2568 kg/m^3