Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994400 DEA: 09378904 EFIS: 0919000003
QA Service Level: 1
DIST-CO-RTE-PM: 09-KER-14-46.2/52.8
Work Description: RHMA PLACED OVER PARTIAL DEPTH RECYCLING.
Location Description: KERN COUNTY NEAR ARMISTEAD FROM 1.1 MILES NORTH OF REDROCK CANYON ROAD TO 3.5 MILES SOUTH OF FREEMAN GULCH BRIDGE
Contractor Name: STATEWIDE TRAFFIC SIGN AND SAFETY
Contractor Address: 4400 State Road, Bakersfield, CA 93308
Resident Engineer: Damon Cherenzia Structure Rep.: Unknown
DIME Sample ID: 2023-06-26-36
TL Number from the TL Form:
Sample Submitted By Organization: CT D09 - Bishop Field Laboratory
Sample Organization Contact: (760) 872-5211
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/26/2023
Date that the sample was received by the laboratory/organization performing the testing: 06/29/2023
The quantity of what the sample constitutes: 1 box
A brief description of the sample: RHMA
From where was the sample collected: Source
Laboratory sample identification: RHMA-25
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Griffith Edmonston-Lebec
DIME Test ID: 2023-06-26-36-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 06/30/2023
Date Tested: 06/30/2023
Submitted By Organization: CT D09 - Bishop Field Laboratory
Organization Address: 500 South Main Street,
Organization City: Bishop
Organization State: CA
Organization Zipcode: 93514
Organization Email: chris.talbot@dot.ca.gov
Organization Phone: (760) 872-0794
General Comments for this Test: RHMA-25
Test Result Compliance: complies
Additional Comments When Verified:
Number of tests
|
1
|
What is the unit of measurement for theoretical density?
|
US Units
|
Mass Determination
|
Air
|
Method Performed
|
Mechanical Agitation - Method A
|
Mass of container filled with water
|
7310.5 grams
|
Mass of oven-dry sample in air for Sample 1
|
2061.2 grams
|
Mass of container filled with the sample and water for Sample 1
|
8538.3 grams
|
Temperature of Water
|
76 °F
|
Specific Gravity for Sample 1
|
2.473
|
Theoretical maximum density at 25°C (77°F)
|
153.9 lb/ft^3
|
DIME Test ID: 2023-06-26-36-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 06/30/2023
Date Tested: 06/30/2023
Submitted By Organization: CT D09 - Bishop Field Laboratory
Organization Address: 500 South Main Street,
Organization City: Bishop
Organization State: CA
Organization Zipcode: 93514
Organization Email: chris.talbot@dot.ca.gov
Organization Phone: (760) 872-0794
General Comments for this Test: RHMA-25
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used?
|
Celsius
|
Test procedure used?
|
Method A
|
Mass of the specimen basket assembly
|
4243.0 g
|
Mass of the specimen and specimen basket assembly prior to ignition
|
6288.5 g
|
Mass of HMA Sample prior to ignition
|
2045.5 g
|
Corrected Asphalt Binder Content
|
7.63 %
|
Mass Loss
|
159.2 g
|
Mass of aggregate remaining after ignition
|
1886.3 g
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.15 %
|
Moisture Content
|
0.00 %
|
Temperature Compensation Factor
|
0.00 %
|
Test Temperature
|
538 C
|