Print Report | Back to Sample Detail

Sample Record for 2023-06-13-61

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993778 DEA: 042W5404 EFIS: 0421000234 QA Service Level: 1
DIST-CO-RTE-PM: 04-MRN-101-4.0/4.6
Work Description: PLACE POLYESTER CONCRETE OVERLAY.
Location Description: MARIN COUNTY NEAR SAUSALITO FROM 0.7 MILE NORTH OF WALDO UNDERCROSSING TO 0.2 MILE SOUTH OF FRONTAGE ROAD
Contractor Name: GOLDEN STATE BRIDGE INC
Contractor Address: 3701 Mallard Dr., Benicia, CA 94510
Resident Engineer: Dawit Habteselassie Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-06-13-61
TL Number from the TL Form: 943805
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 06/13/2023
Date that the sample was received by the laboratory/organization performing the testing: 06/14/2023
The quantity of what the sample constitutes: 2 tankers
A brief description of the sample: 1 gallon can
From where was the sample collected: Source
Laboratory sample identification: 943805
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia

Material Information

Mfg. Lot Number(s): 1475792
Batch number: 1475792
Mix number: 1475792
Test results on following page(s): 6

Test Results

Test 1 of 6

DIME Test ID: 2023-06-13-61-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 06/29/2023
Date Tested: 06/28/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity 93

Test 2 of 6

DIME Test ID: 2023-06-13-61-2
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 06/29/2023
Date Tested: 06/28/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Density Units pounds/gallons
Liquid Density (pounds per gallon) 8.9

Test 3 of 6

DIME Test ID: 2023-06-13-61-3
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 06/29/2023
Date Tested: 06/16/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted suppliers results.
Test Result Compliance: complies
Additional Comments When Verified:
Number of specimens tested 6
Conditioning procedure 18/25/50+5/70
Speed of testing 0.45 in/min
Sample 1 Width 0.487 in
Sample 1 Ultimate strength 3435.2 psi
Sample 1 Thickness 0.252 in
Sample 1 Area 0.1227 in^2
Sample 1 Ultimate Strength Actual 421.5 lbs
Sample 1 percent elongation 65.6 %
Sample 1 Time no data0 MM:SS
Sample 2 Width 0.258 in
Sample 2 Thickness 0.486 in
Sample 2 Area 0.1254 in^2
Sample 2 Ultimate strength 3421.1 psi
Sample 2 Ultimate Strength Actual 429 lbs
Sample 2 percent elongation 64 %
Sample 2 Time no data0 MM:SS
Sample 3 Width 0.25 in
Sample 3 Thickness 0.487 in
Sample 3 Area 0.1218 in^2
Sample 3 Ultimate strength 3417.1 psi
Sample 3 Ultimate Strength Actual 416.2 lbs
Sample 3 percent elongation 66 %
Sample 3 Time no data0 MM:SS
Sample 4 Width 0.26 in
Sample 4 Thickness 0.486 in
Sample 4 Area 0.1264 in^2
Sample 4 Ultimate strength 3362.3 psi
Sample 4 Ultimate Strength Actual 425 lbs
Sample 4 percent elongation 56.9 %
Sample 4 Time no data0 MM:SS
Sample 5 Width 0.249 in
Sample 5 Thickness 0.486 in
Sample 5 Area 0.121 in^2
Sample 5 Ultimate strength 3381.8 psi
Sample 5 Ultimate Strength Actual 409.2 lbs
Sample 5 percent elongation 61.1 %
Sample 5 Time no data0 MM:SS
Sample 6 Width 0.25 in
Sample 6 Thickness 0.487 in
Sample 6 Area 0.1218 in^2
Sample 6 Ultimate strength 3366.2 psi
Sample 6 Ultimate Strength Actual 410 lbs
Sample 6 percent elongation 64.2 %
Sample 6 Time no data0 MM:SS
Ultimate Strength Average 3397 psi
Percent Elongation Average 63 %

Test 4 of 6

DIME Test ID: 2023-06-13-61-4
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 06/29/2023
Date Tested: 06/28/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Mean of two volatile content determination 46.5

Test 5 of 6

DIME Test ID: 2023-06-13-61-5
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 06/29/2023
Date Tested: 06/20/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted suppliers results.
Test Result Compliance: complies
Additional Comments When Verified:
Curing history for Sample 1 24hr
Maximum applied load (P) for Sample 1 1966.4 lb
Span length for Sample 1 9 in
Break location for Sample 1 bond
Specimen defects/notes for Sample 1 no data
Surface type for Sample 1 SSD
Modulus of rupture (R) for Sample 1 983.2 psi
Curing history for Sample 2 24hr
Maximum applied load (P) for Sample 2 2186.6 lb
Span length for Sample 2 9 in
Break location for Sample 2 bond
Specimen defects/notes for Sample 2 no data
Surface type for Sample 2 SSD
Modulus of rupture (R) for Sample 2 1093.3 psi
Curing history for Sample 3 24hr
Maximum applied load (P) for Sample 3 1927 lb
Span length for Sample 3 9 in
Break location for Sample 3 bond
Specimen defects/notes for Sample 3 no data
Surface type for Sample 3 SSD
Modulus of rupture (R) for Sample 3 963.5 psi

Test 6 of 6

DIME Test ID: 2023-06-13-61-6
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 06/29/2023
Date Tested: 06/19/2023
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted suppliers results.
Test Result Compliance: complies
Additional Comments When Verified:
Diameter of lid 153.9 mm
Room Temperature 77 f
Tare weight no data
Initial weight 100.026 grams
Weight at 5 minutes 99.957 grams
Weight at 10 minutes 99.892 grams
Weight at 15 minutes 99.824 grams
Weight at 20 minutes 99.756 grams
Weight at 25 minutes 99.692 grams
Weight at 30 minutes 99.624 grams
Final weight 99.62 grams
Total weight loss 0.41 grams
Calculated radius of gallon can lid in cm 7.695 cm
Lid Factor 53.757 m^2
Volatile emission 21.825 grams/m^2