Print Report | Back to Sample Detail

Sample Record for 2023-06-06-46

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993669 DEA: 112N1164 EFIS: 1121000145 QA Service Level: 1
DIST-CO-RTE-PM: 11-IMP-186-0.0/2.1
Work Description: COLD PLANE, SAMI, RHMA-G AND PAVEMENT MARKINGS
Location Description: IMPERIAL COUNTY AT ANDRADE FROM MEXICO BORDER TO ROUTE 186/8 SEPARATION
Contractor Name: HAZARD CONSTRUCTION ENGR, LLC
Contractor Address: 10529 VINE STREET, LAKESIDE, CA 92040
Resident Engineer: Daniel Hernandez Duarte Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-06-06-46
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 518-8709
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/06/2023
Date that the sample was received by the laboratory/organization performing the testing: 06/09/2023
The quantity of what the sample constitutes: 8 boxes 8 bags
A brief description of the sample: 1/2" RHMA-G
From where was the sample collected: Supplier
Laboratory sample identification: 7402-PSU
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: API Gateway

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number: 1
Sublot number: 3
HMA Mix Number: 1
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 8

Test Results

Test 1 of 8

DIME Test ID: 2023-06-06-46-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/04/2023
Date Tested: 06/20/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of the specimen basket assembly 3881 g
Mass of the specimen and specimen basket assembly prior to ignition 5417.4 g
Mass of HMA Sample prior to ignition 1536.4 g
Corrected Asphalt Binder Content 7.57 %
Mass Loss 117.2 g
Mass of aggregate remaining after ignition 1419.2 g
Correction Factor (Percent by mass of HMA Specimen) 0.06 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 F

Test 2 of 8

DIME Test ID: 2023-06-06-46-2
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/04/2023
Date Tested: 06/15/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of Samples 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7477.1 grams
Mass of oven-dry sample in air for Sample 1 1534.1 grams
Mass of container filled with the sample and water for Sample 1 8371.6 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.399
Theoretical maximum density at 25°C (77°F) 149.3 lb/ft^3

Test 3 of 8

DIME Test ID: 2023-06-06-46-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 08/04/2023
Date Tested: 06/16/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Percent Air Voids 5.8 %
Percent Air Voids 2 6.3 %
Percent Air Voids 3 6.1 %
Average Percent Air Voids 6.1 %

Test 4 of 8

DIME Test ID: 2023-06-06-46-5
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/04/2023
Date Tested: 06/16/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.261
Bulk Specific Gravity 2 2.249
Bulk Specific Gravity 3 2.252
Average Bulk Specific Gravity 2.254

Test 5 of 8

DIME Test ID: 2023-06-06-46-6
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 08/04/2023
Date Tested: 06/22/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Unit system used? SI Units
Average Dry Tensile Strength 149 psi
Average Wet Tensile Strength 126 psi
Tensile Strength Ratio 0.85

Test 6 of 8

DIME Test ID: 2023-06-06-46-8
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Verified Date: 08/04/2023
Date Tested: 06/19/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Specimen Preparation Method no data
Test Temperature 131 F
Air Void Content for specimen A-1 no data
Air Void Content for specimen A-2 no data
Air Void Content for specimen B-1 no data
Air Void Content for specimen B-2 no data
Stripping Inflection Point (Wheel A) >25000
Stripping Inflection Point (Wheel B) >15000
Maximum impression at 5000 passes (left wheel) 0.98 mm
Maximum impression at 5000 passes (right wheel) 1.03 mm
Average impression at 5000 passes (left/right avg) 1 mm
Maximum impression at 10000 passes (left wheel) 1.75 mm
Maximum impression at 10000 passes (right wheel) 2.01 mm
Average impression at 10000 passes (left/right avg) 1.88 mm
Maximum impression at 15000 passes (left wheel) 2.37 mm
Maximum impression at 15000 passes (right wheel) 2.93 mm
Average impression at 15000 passes (left/right avg) 2.65 mm
Maximum impression at 20000 passes (left wheel) 2.76 mm
Maximum impression at 20000 passes (right wheel) 4.21 mm
Average impression at 20000 passes (left/right avg) 3.49 mm
Average impression at 25000 passes (left/right avg) 4.13 mm

Test 7 of 8

DIME Test ID: 2023-06-06-46-9
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/07/2023
Date Tested: 08/07/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Cores 1A3,1B3, 1C3
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.2
Bulk Specific Gravity 2 2.174
Bulk Specific Gravity 3 2.193
Average Bulk Specific Gravity 2.189

Test 8 of 8

DIME Test ID: 2023-06-06-46-10
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/07/2023
Date Tested: 08/07/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Cores 1A4
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.17