Project Information

Project ID: 214892 DEA: 06442554 EFIS: 0612000176 COOP: 061699 QA Service Level: 1

DIST-CO-RTE-PM: 06-KER-46-29.7/31.9

Work Description: CONVERT 2-LANE TO 4-LANE HMA PAVEMENT AND CONSTRUCT NEW BRIDGE.

Location Description: KERN COUNTY AT AND NEAR LOST HILLS FROM 0.2 MILE WEST OF CALIFORNIA AQUEDUCT BRIDGE TO 1.4 MILES EAST OF LOST HILLS ROAD

Contractor Name: GRANITE CONSTRUCTION COMPANY

Contractor Address: 3005 James Road, Bakersfield, CA 93308

Resident Engineer: Trever Shiplee Structure Rep.: Gabriel Macias

Sample Information

DIME Sample ID: 2023-05-24-10

TL Number from the TL Form:

Sample Submitted By Organization: CT D06 - Bakersfield Field Laboratory

Sample Organization Contact: 661-549-8281

Type of Sample: Department Acceptance

Type of Material: Hot Mix Asphalt

Sample Taken Date: 05/24/2023

Date that the sample was received by the laboratory/organization performing the testing: 05/25/2023

The quantity of what the sample constitutes: L1SL45- 10 box HMA, 2 bags of cold feed, 1 bags of virgin aggregate and 1 bag Rap

A brief description of the sample: 3/4 HMA-SP Type A

From where was the sample collected: Source

Laboratory sample identification:

Structure unique identifier:

Structure name:

The fabricator/manufacturer/facility name: Granite Solari

Material Information

HMA Type: Type A HMA

HMA Grading: 3/4 inch

Lot number: 1

Sublot number: 45

HMA Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2023-05-24-10-1

Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)

Verified Date: 05/25/2023

Date Tested: 05/24/2023

Submitted By Organization: CT D06 - Bakersfield Field Laboratory

Organization Address: 1824 Norris Road,

Organization City: Bakersfield

Organization State: CA

Organization Zipcode: 93308

Organization Email: kulwinder.rai@dot.ca.gov

Organization Phone: (661) 549-8281

General Comments for this Test: L1SL45

Test Result Compliance: complies

Additional Comments When Verified:

What temperature unit is used?	Fahrenheit
Test procedure used?	Method A
Mass of the specimen basket assembly	4300.3 g
Mass of the specimen and specimen basket assembly prior to ignition	6423.6 g
Mass of HMA Sample prior to ignition	2123.3 g
Corrected Asphalt Binder Content	4.20 %
Mass Loss	101.0 g
Mass of aggregate remaining after ignition	2022.3 g
Correction Factor (Percent by mass of HMA Specimen)	0.56 %
Moisture Content	0.00 %
Temperature Compensation Factor	0.00 %
Test Temperature	538 F

Test 2 of 2

DIME Test ID: 2023-05-24-10-2

Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)

Verified Date: 05/26/2023

Date Tested: 05/26/2023