Print Report | Back to Sample Detail

Sample Record for 2023-05-12-63

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994120 DEA: 040J6314 EFIS: 0421000252 QA Service Level: 1
DIST-CO-RTE-PM: 04-SOL-12-21.2/22.6
Work Description: ROADWAY RESURFACING, INSTALL DRAINAGE SYSTEM, MIDWEST GUARDRAIL SYSTEM
Location Description: SOLANO COUNTY NEAR RIO VISTA FROM MCCLOSKY ROAD TO 0.1 MILE WEST OF AZEVEDO ROAD
Contractor Name: Bay Cities Paving & Grading (David Jimenez)
Contractor Address: 1450 Civic Ct. BLDG B #400, Concord CA, 94520
Resident Engineer: Noel Aquino Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-05-12-63
TL Number from the TL Form: C727234
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 05/12/2023
Date that the sample was received by the laboratory/organization performing the testing: 05/12/2023
The quantity of what the sample constitutes: 1 bag
A brief description of the sample: 1/2 HMA Type A
From where was the sample collected: Manufacturer
Laboratory sample identification: Con_23_438
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Teichert Vernalis

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-39-0041
The fabricator's/manufacturer's product name for the sample: 1/2 HMA Type A
The fabricator/manufacturer designation for the sample: Drum Plant
The plant number:
A detailed description of where the material sample was collected: coldfeed
Where the material sample would have been placed if not sampled: JMF
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number: 30240442412V

Test Results

Test 1 of 2

DIME Test ID: 2023-05-12-63-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 05/18/2023
Date Tested: 05/16/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test: JMF
Test Result Compliance: complies
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 95 %
Cumulative percent passing the 3/8 in. sieve 82 %
Cumulative percent passing the #4 sieve 54 %
Cumulative percent passing the #8 sieve 38 %
Cumulative percent passing the #16 sieve 23 %
Cumulative percent passing the #30 sieve 15 %
Cumulative percent passing the #50 sieve 11 %
Cumulative percent passing the #100 sieve 6 %
Cumulative percent passing the #200 sieve 4 %

Test 2 of 2

DIME Test ID: 2023-05-12-63-2
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 05/18/2023
Date Tested: 05/17/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sand Equivalent 68