Print Report | Back to Sample Detail

Sample Record for 2023-05-15-57

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214549 DEA: 081H2904 EFIS: 0817000006 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-173-18.7
Work Description: STRUCTURAL CONCRETE SOIL NAIL WALL AND SOLDIER PILE WALL.
Location Description: SAN BERNARDINO COUNTY NEAR CEDAR GLEN AT 0.1 MILE SOUTH OF HOSPITAL ROAD
Contractor Name: Stronghold Engineering, Inc.
Contractor Address: 150 W. Walnut Ave, Perris, CA 92571
Resident Engineer: Elvira Lenart Structure Rep.: Ravinder Singh

Sample Information

DIME Sample ID: 2023-05-15-57
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 05/15/2023
Date that the sample was received by the laboratory/organization performing the testing: 05/18/2023
The quantity of what the sample constitutes: 3 bags of agg., 1 bag of RAP
A brief description of the sample: PSUE 3/4" HMA-A-SP R15 NO LAS
From where was the sample collected: Manufacturer
Laboratory sample identification: 0262A-23
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: AAA- Corona

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-33-0005
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Belt Cut at AAA - Corona
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: 105927
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2023-05-15-57-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)05/18/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-05-15-57-2AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)05/18/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-05-15-57-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)05/18/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-05-15-57-4AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)05/18/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-05-15-57-5AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)05/18/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-05-15-57-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)05/18/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-05-15-57-7AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)05/18/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-05-15-57-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)05/18/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-05-15-57-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates05/18/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-05-15-57-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates05/18/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory