Print Report | Back to Sample Detail

Sample Record for 2023-05-12-59

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994120 DEA: 040J6314 EFIS: 0421000252 QA Service Level: 1
DIST-CO-RTE-PM: 04-SOL-12-21.2/22.6
Work Description: ROADWAY RESURFACING, INSTALL DRAINAGE SYSTEM, MIDWEST GUARDRAIL SYSTEM
Location Description: SOLANO COUNTY NEAR RIO VISTA FROM MCCLOSKY ROAD TO 0.1 MILE WEST OF AZEVEDO ROAD
Contractor Name: Bay Cities Paving & Grading (David Jimenez)
Contractor Address: 1450 Civic Ct. BLDG B #400, Concord CA, 94520
Resident Engineer: Noel Aquino Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-05-12-59
TL Number from the TL Form: C727233
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/12/2023
Date that the sample was received by the laboratory/organization performing the testing: 05/12/2023
The quantity of what the sample constitutes: 4 boxes
A brief description of the sample: 1/2 HMA Type A
From where was the sample collected: Manufacturer
Laboratory sample identification: Con_23_430
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Teichert Vernalis

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number: 30240442412V
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2023-05-12-59-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 05/18/2023
Date Tested: 05/17/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of Samples 2
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7371.8 grams
Mass of oven-dry sample in air for Sample 1 1869.6 grams
Mass of container filled with the sample and water for Sample 1 8494.7 grams
Mass of container filled with water 2 7371.8 grams
Mass of oven-dry sample in air for Sample 2 1610.5 grams
Mass of container filled with the sample and water for Sample 2 8336.9 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.504
Specific Gravity for Sample 2 2.495
Average Specific Gravity 2.500
Theoretical maximum density at 25°C (77°F) 2492.8 kg/m^3