Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994142 DEA: 044J9504 EFIS: 0416000026
QA Service Level: 1
DIST-CO-RTE-PM: 04-CC-4-R30.8/R40.4
Work Description: ROADWAY EXCAVATION, TEMPORARY BARRIER, AND HMA PAVING AT MVPS.
Location Description: CONTRA COSTA COUNTY ON ROUTE 4 AT VARIOUS LOCATIONS FROM 0.4 MILE EAST OF ROUTE 160/4 SEPARATION TO HOFFMAN LANE
Contractor Name: BAY CITIES PAVING & GRADING INC.
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2023-05-08-59
TL Number from the TL Form: C727121
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/08/2023
Date that the sample was received by the laboratory/organization performing the testing: 05/08/2023
The quantity of what the sample constitutes: 4 Boxes
A brief description of the sample: 1/2 HMA Type A
From where was the sample collected: Manufacturer
Laboratory sample identification: Con_23_410
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: County Asphalt Martinez
DIME Test ID: 2023-05-08-59-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 05/18/2023
Date Tested: 05/09/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of Samples
|
1
|
What is the unit of measurement for theoretical density?
|
SI Units
|
Mass Determination
|
Air
|
Method Performed
|
Mechanical Agitation - Method A
|
Mass of container filled with water 1
|
7371.8 grams
|
Mass of oven-dry sample in air for Sample 1
|
1687.8 grams
|
Mass of container filled with the sample and water for Sample 1
|
8409.5 grams
|
Temperature of Water
|
77 °F
|
Specific Gravity for Sample 1
|
2.596
|
Theoretical maximum density at 25°C (77°F)
|
2588.5 kg/m^3
|