Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993482 DEA: 060V2804 EFIS: 0616000124
QA Service Level: 1
DIST-CO-RTE-PM: 06-KER-184-L0.9/L1.1
Work Description: PLACE HMA AND MINOR CONCRETE, REPLACE ELECTRICAL & LIGHTING SYSTEMS.
Location Description: KERN COUNTY NEAR LAMONT FROM 0.1 MILE SOUTH TO 0.1 MILE NORTH OF SUNSET BOULEVARD
Contractor Name: Griffith Company
Contractor Address: 1128 Carrier Parkway, Bakersfield ,CA 93308
Resident Engineer: Jose Quiroz Structure Rep.: Unknown
DIME Sample ID: 2023-05-10-2
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Sample Organization Contact: 661-549-8281
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/10/2023
Date that the sample was received by the laboratory/organization performing the testing: 05/11/2023
The quantity of what the sample constitutes: lot 1 SL 3 750 ton
A brief description of the sample: 3/4" HMA Type A with 15% RAP
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Griffith Edmonston
DIME Test ID: 2023-05-10-2-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 05/11/2023
Date Tested: 05/11/2023
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test: L1SL3
Test Result Compliance:
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
SI Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
Mechanical Agitation - Method A
|
|
Mass of container filled with water
|
7328.4 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
2551.2 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8894 grams
|
|
Temperature of Water
|
77 °F
|
|
Specific Gravity for Sample 1
|
2.588
|
|
Theoretical maximum density at 25°C (77°F)
|
2580.5 kg/m^3
|
DIME Test ID: 2023-05-10-2-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 05/11/2023
Date Tested: 05/11/2023
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test: L1SL3
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Fahrenheit
|
|
Test procedure used?
|
Method A
|
|
Mass of the specimen basket assembly
|
4299.5 g
|
|
Mass of the specimen and specimen basket assembly prior to ignition
|
6393 g
|
|
Mass of HMA Sample prior to ignition
|
2093.5 g
|
|
Corrected Asphalt Binder Content
|
4.67 %
|
|
Mass Loss
|
106.7 g
|
|
Mass of aggregate remaining after ignition
|
1986.8 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.43 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
no data0 %
|
|
Test Temperature
|
538 F
|
DIME Test ID: 2023-05-10-2-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 05/12/2023
Date Tested: 05/12/2023
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test: L1SL 3 3A= 92.9%, 3B = 93.4%, 3C= 93.1%
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.318
|
|
Bulk Specific Gravity 2
|
2.311
|
|
Bulk Specific Gravity 3
|
2.295
|
|
Average Bulk Specific Gravity
|
2.308
|