Print Report | Back to Sample Detail

Sample Record for 2023-04-18-95

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214986 DEA: 041J9704 EFIS: 0414000404 QA Service Level: 1
DIST-CO-RTE-PM: 04-SCL-17-2.8/13.94
Work Description: PAVING WITH RHMA, COLD PLANE AC, AND INSTALL CULVERT.
Location Description: SANTA CLARA COUNTY IN AND NEAR LOS GATOS, CAMPBELL AND SAN JOSE FROM HEBARD ROAD TO ROUTE 17/280 SEPARATION
Contractor Name: GRANITE ROCK COMPANY
Contractor Address: 120 Granite Rock, San Jose, CA 95136
Resident Engineer: Ali Nikzad Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-04-18-95
TL Number from the TL Form: C927716
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/18/2023
Date that the sample was received by the laboratory/organization performing the testing: 04/18/2023
The quantity of what the sample constitutes: 788.56 Tons
A brief description of the sample: 3/4 RHMA-G
From where was the sample collected: Manufacturer
Laboratory sample identification: SJ-041823-OC3
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Rock Wilson Aromas Batch

Material Information

HMA Type: RHMA-G
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 103
HMA Mix Number: 917
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2023-04-18-95-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 02/12/2024
Date Tested: 04/21/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 2109.5 g
Corrected Asphalt Binder Content 7.32 %
Mass Loss 159.7 g
Correction Factor (Percent by mass of HMA Specimen) 0.19 %
Moisture Content no data0 %
Temperature Compensation Factor 0.06 %
Test Temperature 482 C

Test 2 of 2

DIME Test ID: 2023-04-18-95-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 02/12/2024
Date Tested: 04/18/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 2147.4 g
Corrected Asphalt Binder Content 7.9 %
Mass Loss 175 g
Correction Factor (Percent by mass of HMA Specimen) 0.19 %
Moisture Content no data0 %
Temperature Compensation Factor 0.08 %
Test Temperature 482 C